Rear channel trouble.....

[ekkoville]

My RSP-1068 seems to have trouble with the rear right channel in surround modes. The volume level has seem to drop way off during surround play and test tone's. I have move the cables and confirmed it isn't the amp but am perplexed as to what it could be. I also did a reset of factory default settings to at least start from new, but no joy. Any input would greatly help.

Erik

[soundhound]

you did swap the right for left channels at the output of the 1068? Are you running rear centers (7.x) or just surrounds (5.x) ?

[ekkoville]

Yeah, swaped the two channels at the 1068 only, and running 5.1.

[soundhound]

Ultimately it sounds like it's ready for a trip to the dealer, allthough you could select 7.1 in the speaker set-up menu, (rear centers = 2) check and see if it comes back, and see if it is software/ processor derived or hardware.