Rear channel trouble.....

Collapse
This topic is closed.
X
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • ekkoville
    Senior Member
    • Aug 2004
    • 392
    #1

    Rear channel trouble.....

    My RSP-1068 seems to have trouble with the rear right channel in surround modes. The volume level has seem to drop way off during surround play and test tone's. I have move the cables and confirmed it isn't the amp but am perplexed as to what it could be. I also did a reset of factory default settings to at least start from new, but no joy. Any input would greatly help.

    Erik
    ____________________
    Erik
    Just another case of the man trying to keep us down! :B
    Tags: None
      • Bottom
    • soundhound
      Senior Member
      • Mar 2004
      • 816
      #2
      you did swap the right for left channels at the output of the 1068? Are you running rear centers (7.x) or just surrounds (5.x) ?
        • Bottom

        Comment

        • ekkoville
          Senior Member
          • Aug 2004
          • 392
          #3
          Yeah, swaped the two channels at the 1068 only, and running 5.1.
          ____________________
          Erik
          Just another case of the man trying to keep us down! :B
            • Bottom

            Comment

            • soundhound
              Senior Member
              • Mar 2004
              • 816
              #4
              Ultimately it sounds like it's ready for a trip to the dealer, allthough you could select 7.1 in the speaker set-up menu, (rear centers = 2) check and see if it comes back, and see if it is software/ processor derived or hardware.
                • Bottom

                Comment

                Previous template Next

                Related Topics

                Collapse
                • Steve_barrow
                  Multi-Input lost rear channels on 1068??
                  by Steve_barrow
                  Evening folks;

                  wondering if anyone mighthave seen this...and better yet have a quick fix to save me going back for service.. for some reason, the rear speakers for the milti-input have just stopped working. I swapped some cables, pointed the rears out of the universal player to the fronts...
                  06 July 2005, 21:05 Wednesday
                • jrlaw10
                  Dolby TrueHD/RSP-1068/Multi Input Help!!
                  by jrlaw10
                  Help needed for a novice please!! I have had my RSP-1068 for a year and love it. I have been using a standard DVD player and have connected my audio via a coaxial cable. I have a 5.1 speaker setup. Setup was easy: Video Input 1 is my DVD player with the input as coaxial 1. The default mode is Dolby...
                  05 April 2008, 14:33 Saturday
                • David L.
                  Help setting up RSP-1068
                  by David L.
                  I recently purchased a used RSP-1068 and I'm having trouble setting it up, so I hope someone here can help me.

                  I'm trying to set up the speakers using the test tone but have no sound coming from the rear spakers. The processor is set to Video 4 Dolby PLIIx C and all speakers are set to...
                  29 August 2006, 11:11 Tuesday
                • mhoyt
                  RSP 1068 Trouble
                  by mhoyt
                  Hi,

                  I am new to HTGuide so I apologize if this is a re-run of an older thread.

                  I have a Rotel RSP-1068 that I purchased a few years ago. Its suddenly having a lot of problems. The Front L/R channels are dead and occasionally it appears to just lose sync with the audio source...
                  05 September 2006, 14:44 Tuesday
                • JimTW
                  Rotel RSX-1056 VS. RSP-1068 for my B&Ws
                  by JimTW
                  I'm thinking about the 804S for half HT and half stereo music use.

                  However, I'm wondering if anyone has had experience with these 2 setup
                  and curious if there are any audible differences in sound quality.

                  Setup 1:
                  RSX-1056 with RB-1080. 1080 for 2 main fronts....
                  26 April 2005, 15:28 Tuesday
                • Loading...
                • No more items.
                Working...
                  Searching...Please wait.
                  An unexpected error was returned: 'Your submission could not be processed because you have logged in since the previous page was loaded.

                  Please push the back button and reload the previous window.'
                  An unexpected error was returned: 'Your submission could not be processed because the token has expired.

                  Please push the back button and reload the previous window.'
                  An internal error has occurred and the module cannot be displayed.
                  There are no results that meet this criteria.
                  Search Result for "|||"