I just started looking at this piece as a possible replacement for my aging receiver. I saw the specs on the Rotel page, I am wondering if that is an Ethernet port on the back of this unit. If so, what is the purpose? Firmware upgrades? MP3 playback from your PC?(That would be sweet to see winamp visuals on the TFT) Any info would be greatly appreciated, as I narrowed down my choices to the Anthem AVM20(suprise) and this unit.
-
-
Actually, it's an RS-232 port that uses an RJ-45 connector for the interface. The port is used for firmware updates and could also be used for controlling the processor. -
There's also talk of a new Rotel device coming out that will allow users to connect their Rotel gear together via these ports and be able to interface with them via a web browser screen via a LAN. I'm not sure when we'll see that device but it sounds very cool:yesnod:
Comment
-
If one has the right programming skills, I don't think very hard to make a web browser interface which sends the right RS232 commands to the receiver/preamp. I have a friend who does stuff like that, and if I get him to make a web interface for Rotel, I'll surely post it here.
But this is a big IF (busy guy), so don't be too disappointed if I don't get it done...
-AudunRegards,
AudunComment
-
I am having difficulty getting my Linksys SRX MIMO Router to work with
my XboX 360 Wireless adapter.
I was able to link our upstairs Computer and Laptop to the wireless network.
However the XboX 360 will not gain an IP address.
The XboX 360 does get a signal and is locked... -
Hi,
I have tryed many apps, many possible configuration to play over the ethernet input from CP 800.
I dont want to use PC/Jriver as configuration. I know it works.
The most obvious configuration is : DsAudio on NAS and use its app. It works but I dont like it: it disconnects,... -
I cant find the Rotel RSP-1570 manual anywhere... but it looks like an ethernet port on the back. Any chance it'll let me stream music from my computer directly to the receiver?? -
-
Hello, I am new here and a pround new owner of a RSP-1066 and RMB-1075.
I have a question about the 1066 Remote's ability to change from one device to another.
Can I switch, say from a currently selected device like DVD to CD, WITHOUT having to access the OSD and manually...
Comment