If I were to biamp my center channel would I run a separate connection from Center I pre-out and Center 2 pre-out of the 1098 to two of the amplifiers of the 1075, or would I simply have to split the Center 1 pre-out? I will not be using an external cross-over.
-
New Reviews of RSP1098/RMB1075 in the new issue of Widescreen Review.Subscribers can access via their website.20 February 2004, 18:20 Friday -
I'm having thoughts about upgrading my system and want some advice on which direction to proceed. Currently I have a RMB1075 driving the fronts center and side surrounds of a 7.1 system with a RB1050 driving the rears. I have contemplated two different possibilities. The first is to change the 1050... -
Hello. I'm new here, but i'm reading the posts here a long time. Now i registered, because i have an important question or is it only important for me?
Now i have a RMB1075 as amplifier. My Denon 1800 has only preouts for fronts and center and i biamp my KEFs. For the future with another processor,... -
Just got my first 2 Rotel components, namely an RSP1098 and an RMB1075.
Very happy with both, even though they are severely being limited at the moment by my cheap Yamaha speakers which will be replaced with B&W (800 or 700 series) very soon.
Only 1 thing i can't get to work, the speaker... -
Hi Guys ,
I need some advice as to what is best .
I want to add another amp to my RSX1065 to run some B&W604S3's
Do I :
1.get RB 1080 and biwire the 604's(200w per speaker)
2.get RMB1075 and biamp the 604's (2x120w per speaker and leaves one channel spare...
Comment