looking to change fuses on the psu, running 110 voltage. any advise/recommendations.
-
Hello,
Has anyone changed the fuse in a RB-1095.
I don't get audio coming out of the rear channe, I think one of the fuses is blown. I opened the 1095 and the fuses are buried way in the PCB.
I experienced this with the 1080, It was a blown fuse. The fuses in the RB-1080... -
Hi all,
I am in the process of "attempting"
to build a X-psu for the x-10 v3. I know the psu type is a 12-0-12. The standard wallwart plugpack is rated at 500ma. I have been able to get my hands on a toroidal transformer rated at 160VA with two 12v secondaries (over 6 amps...
-
Help.
I think I have a blown fuse in my RC1090 preamp. I took of the cover and saw that the fuse had a clear cover over it with a warning do not remove unless a trained tech. I suppose the warning is because of the power supply, but by just looking at the fuse it looks broken. Its a very... -
Hello everyone, im new here but i couldnt resist, as ive had nothing but blowing fuses since ive owned my RB991 ( same as the 1080 apart from the remote trigger)
So far :my amp was originally driving 4 ohm sub in an enclosed space, fuses would blow on a regular basis, Lots of blame went... -
Last week I blew two fuses in my RB985. The fuses are to old to read.
I believe they are a 6amp 125volt porcelian fuse. I do not know if they are fast or slow blow fuses, I assume it is fast blow.
Can anyone verify the type of fuses which I need. I am also having trouble finding...06 April 2008, 22:55 Sunday
Comment