A51 is clicking!

Collapse
This topic is closed.
X
X
 
  • Time
  • Show
Clear All
new posts
  • mikepinkerton
    Member
    • Jun 2004
    • 86

    #1

    A51 is clicking!

    My 4 year old A51 has started intermittently clicking on/off the right-most two blue indicator lights on the front panel. Usually this only happens while watching a movie, I haven't seen (or heard) it during normal TV watching. If I put the same movie into "stereo" mode on my pre/pro, it stops clicking, so it's something about the signal going to the 2 rear channels.

    I found nothing in the manual to indicate what the lights going out meant (they come back on almost instantly, but then go out again later with a distinctly audible CLICK). They don't go red at all. Everything else appears normal.

    What can I do? Bad cables? Bad internals? I bought this to last me years and years :-(
    -Mike
  • planitismetal
    Senior Member
    • Dec 2008
    • 212

    #2
    Have you checked out all the connections? Or maybe a fuse?

    Comment

    • mikepinkerton
      Member
      • Jun 2004
      • 86

      #3
      All the connections seem solid. Would a bad or disconnected RCA cable cause the channel light to go out?

      -Mike

      Comment

      • planitismetal
        Senior Member
        • Dec 2008
        • 212

        #4
        Yesterday my pro had the same clicking and it was because of a disconnected RCA cable...But take a look at the fuse...

        Comment

        • Peter Nielsen
          Super Senior Member
          • Sep 2004
          • 1188

          #5
          Originally posted by mikepinkerton
          I bought this to last me years and years
          And it probably will. Be glad that the unit still has full warranty in effect! :T
          (Labor+parts: 5 years)

          If you don't have the original box, ask Parasound to send one so that you can safely ship it to them for service.

          Peter

          Comment

          • mikepinkerton
            Member
            • Jun 2004
            • 86

            #6
            Alas, no. I bought it 2nd hand from someone on audiogon so the warranty doesn't apply. I figured I was safer doing that with an amp.

            -Mike

            Comment

            • Glen B
              Super Senior Member
              • Jul 2004
              • 1106

              #7
              Swap the interconnecting cables between the two offending channels of the amp and another two and see if the clicking migrates. If it does, then you will know the problem is with the pre/pro or cables. If you bought the amp used from a consumer who registered the amp, you may get lucky and Parasound will honor the remaining period of the warranty. It may not hurt to ask and grovel a little bit. :B I think high end companies are looking to protect against grey market sales of ther products, not hurt legitimate end users.


              Comment

              Related Topics

              Collapse

              • oucory
                Fluorescent lights bad?
                by oucory
                Are they bad for home theater rooms.
                18 December 2004, 17:29 Saturday
              • Zedd
                A few questions about Parasound amp A51.
                by Zedd
                Hello,

                I just received my new set-up cosisting of Parasound C2 and A51 and have been most pleased with the sound quality.

                I previously owned a Pioneer 49tx and was satisfied until the upgrade bug hit me so I added an external 5 channel power amplifier (Sherbourne 5210)...
                08 March 2004, 00:30 Monday
              • eulogytool
                Is this normal, RSP-1098 "Clicking"? and Break in period.
                by eulogytool
                I broke down and and bought the 1098 after months of debating and I am very happy.

                First question is: What is the normal break in period for a Pre/Amp to reach it's full dynamic potential?

                Second question: I have my gear loaded onto one circuit and when my refrigerator...
                22 January 2004, 00:37 Thursday
              • hamtor
                A51 110v - 230v
                by hamtor
                I am thinking of buying a parasound a51 us model, but before I can use it in my home, I must change the operating voltage from 110 v to 230 v. In the owners manuel, it says : " Changing the A51`s operating voltage involves rewiring internal connections for both its main power transformer, and standby...
                16 September 2004, 02:30 Thursday
              • MarkStega
                Silent A51 - Any suggestions?
                by MarkStega
                Last evening, about 10 minutes into a movie, I was suddenly watching a silent film. My two week old A51 had all of the "channel" lights out, but the blue halo is still around the power button. The mode switch is in 'manual'. The power switch does nothing. I've tried doing a complete powerfail,...
                20 November 2003, 08:47 Thursday
              • Loading...
              • No more items.
              Working...
                Searching...Please wait.
                An unexpected error was returned: 'Your submission could not be processed because you have logged in since the previous page was loaded.

                Please push the back button and reload the previous window.'
                An unexpected error was returned: 'Your submission could not be processed because the token has expired.

                Please push the back button and reload the previous window.'
                An internal error has occurred and the module cannot be displayed.
                There are no results that meet this criteria.
                Search Result for "|||"