One of my JC1 has no bright blue light around the power button, but a weak red light when it is on. When it is off, the weak blue light is present as it should. Acording to the previous owner this is a weaknes to the Halo's, and there is a modificatin avaliable. Is this true or does it indicate that somthing is wrong with the amp?
-
-
The same thing happened to one of my JC1s. Call Parasound for service. The red light indicates a possible short. -
OK. Thanks.Comment
-
Yikes, yes, a red light anywhere on a Halo unit, other than the "P" logo, indicates a problem. I've never encountered it on mine, but if you've got one, call P-sound right away.
CHRIS
Well, we're safe for now. Thank goodness we're in a bowling alley.
- PleasantvilleComment
-
I have never heard about this as a common "weakness", and I have owned TEN (10) JC-1s. I have never seen the problem.Originally posted by Aubi
It is not just a malfunctioning diode. As other here say, there is obviously a fault somewhere. Since the amp works, the fault is probably something simple like a bad solder joint.
In any case, you should make sure that the problem is fixed now. If you leave it like that, the problem may get worse and the amp starts to burn out parts if you're really out of luck.
The only major weakness is a flaw with Parasounds packaging: The INNER BOX must be strapped. Parasound does not do this. If this is not done, the amp may easily be damaged in shipping (especially if it is left in the hands of UPS and their 3 ft conveyor belt drops...). One of mine, and one of Jesse's amps suffered this fate, which usually results in a bashed-in rear panel.
PeterComment
-
What I'll do first thing tomorrow morning is to cross exhange the power button unit between the two amps. This will definetly give me the answer I'm looking for.Comment
-
You mean switching the standby PCBs - yes, that's a very good start!Originally posted by Aubi
PeterComment
-
I hate to say it, after all the help I have had here. I was right!
I mannaged to move the problem over to the other amp by cross exhangening the power button. It,s the blue led that's i bad shape.
Right now Cohen is singing Halleluja
, and a replacement led is on the way(also from Canada).
I have sad before that I like the thrill of this, but for a while it wasn't so mutch fun. Now it is :TComment
-
That's weird... Why do you have red light when the amp is on? Even if the blue led is broken, there should be no light from the red led...Originally posted by Aubi
PeterComment
-
It's weird yes. The two red leds are on and in "dim" whenever there is power to the amp. They "bright" up during the power up sequence and when it goes to protection mode.Originally posted by Peter Nielsen
I'll try to show you some pics of it later.Comment
-
Tis is how it works. Before and after the blue led has stopped working!Attached FilesComment
-
-
Setup since yesterday: RSP-1098, RMB-1075, and RDV-1060 with catcables (just received, they are awesome); 2 fronts, 2 rears, 1 center, 1 sub (all speakers are Piega). I installed the most recent upgrade on the 1098 as well and then set to default settings.
Cables are definitely connected... -
Hi,
I was wondering whether someone has experienced anything like this. Just a few weeks ago, after watching a movie. I turned off my amplifier RMB 1075 and heard a loud pop. I cannot really tell if it came from the amp or speaker, but one thing I noticed though was that the protection light... -
Ive just noted a strange thing at my RSP-1068, i have no blue light around the volume control... i cant remember if it were okey when i got it...
is it easy to fix this by myself?
/confused -
Is there a blue light around the volume knob ? There seems to be on various pictures, but it's not working on mine......... -
Is there anyway to Dim the blue ring light around the front power button.
I searched the manual but only found that pressing MENU will turn off display- not the light. (It's very bright in dark room)
Comment