Controlling DB1 by remote

[TimbaLand]

Hi guys

I have 2 presets that I programmed on my DB1. 1 for stereo and the other for HT. I wanna save me the leg work to go change between the preferred presets for the mode I'm playing. I have a harmony remote control. What'd the best way to remotely control this sub?

[kobestonecold]

Also got same set up for DB1 for both HT and stereo. What i do i set HT for present 1 because the DB1 will always turn on to present 1 anyway. I set stereo to present 2 and i connect 3.5 cable from the amp to DB1 set it trigger the DB1 to change to present 2. Hope it make sense.

[TimbaLand]

I think I get it. I'll set preset 2 to come on by 12v triggering with my pro set to triggering on stereo. I'll try it

[TimbaLand]

I did the 12v connection. It's working very well. I battled initially but it was only later that I realized it's trigger 2 that Is used for this purpose

[kobestonecold]

yep a bit tricky at first but have to find the way

[Frank Helmling]

Since I have 2 DB1's, to control my presets, the better way is also to use the Triggers ("Neutral" and "Impact"). Music in Stereo and Concerts is one of my Receiver Outputs, Cinema is a second. each of'em features it's own "triggered" subwoofer profil automatically...brilliant, much better than a remote for sure...