If I wanted to use spikes but did not want to damage my wood floor, what options do I have?
804's on wood floor
Collapse
This topic is closed.
X
X
-
Put a quarter/penny under them... that or something that is hard enough to withstand the weight from the speakers without going through to your floor (basically something flat and metalic).
Or you could go for these highly expensive things...
Kidding on the expensive part.Digital Audio makes me Happy.
-Dan- Bottom
-
Originally posted by mbjamesPutting the 804's on spikes does what to the sound quality?
also, I can't seem to find my spikes, where do I buy more?
You want friction. Go out and get some rubber sheeting and cut out pads to put under the speakers. It should work very well and protect your floors. I would start at the Home Depot. The should have something that will work.- Bottom
Comment
-
Soundcare Super Spikes work great for me. B&W use 6mm threads. This link is to the ordering page for the standard model.
You need to get those small round metal disks to put under the spikes that come with B&W speakers, and then put some felt under those. Only problem I had was that every time the house cleaners came, they would bump the speaker spikes and knock them off of the pads.
Soundcare Super Spikes offer a much more secure footing IMO.- Bottom
Comment
-
Originally posted by beden1Soundcare Super Spikes work great for me. B&W use 6mm threads. This link is to the ordering page for the standard model."Dream as if you'll live forever. Live as if you'll die today."- Bottom
Comment
-
Originally posted by RebelManHow did you adjust the spikes to level the speaker? The OEM spikes have tools for this but the concept and the ease of use of the Super Spikes is intriguing.
Their main web page: http://www.soundcare.no/
** Check the thread size on your large B&W's as they are showing M6 & M8 thread sizes for B&W. My 703s and 803Ds used M6. They are very good/timely at responding to questions. Look at top of main web page for link to dimensions.- Bottom
Comment
-
I use damping feet from Sonic Desing to my 802D, I guees they will work well under a pair of 804 as well
sonic design- Bottom
Comment
-
Independent proof? I don't know about that, but audiophiles have for years attempted to decouple audio gear from groundborne and airborne vibrations which, to my ears, is a noble endeavor that allows gear to perform optimally and has sonic benefits. It is especially important in gear that has a lot of mechanical moving parts, like disc machines. I have aurios under my SACD player and it makes a huge difference.
Spikes are supposed to minimize the effect of groundborne vibrations on the speaker not, as someone said earlier, to anchor them to the ground. If that was the case, why use a spike? Spikes minimize the floor surface area that is in contact with the speaker. Is there "proof" that this improves audio quality? Well, gee, for that we need double-blind, controlled trials and now we're off in a whole 'nother area we don't want to get into.Integrated 7.1 HT and Two-Channel System
Pioneer KRP-600M | VAC Phi Beta 110i | to be determined front end
B&W 802D | B&W HTM1D | B&W ASW-825 | B&W N805 | B&W SCM1
VPI Scout | Oppo BDP-95 | Tivo Series 3 | Integra DTC-9.8
Audio Refinement Multi-5 | PS Audio Premier | Goertz and Electra Glide cables- Bottom
Comment
-
Originally posted by goe2112Just curious, Should an individual who has wooden floors use spikes or not. If so, why ? Is there independant proof that spikes benifit the sound when placed on wooden floors? Once again just curious.
My one setup is on wood floors. Under my sub woofers, I have granite bases with Soundcare Superspikes. I also have the Superspikes under my main floor speakers. These have virtually eliminated resonating vibrations and rattles that were very evident.
In my other setup with marble floors over a concrete slab, I use the Soundcare Superspikes to elevate my main speakers and floor surround speakers off the floor a bit, and to level/stabilize their footing.- Bottom
Comment
-
The only thing spikes will do is to pass/forward the vibration from the speakers to the ground/floor. Sure your speaker will probaly stand steady but what you really should do is to "disconnect" the speaker from the floor. You can do that with soft feet.- Bottom
Comment
-
Originally posted by rystThe only thing spikes will do is to pass/forward the vibration from the speakers to the ground/floor. Sure your speaker will probaly stand steady but what you really should do is to "disconnect" the speaker from the floor. You can do that with soft feet.
Whatever their composition or science, they work for me in dampening vibration problems I had.
I agree that normal spikes pass vibrations, however. They did not work for me when I tried them first.- Bottom
Comment
-
Originally posted by goe2112Just curious, Should an individual who has wooden floors use spikes or not. If so, why ? Is there independant proof that spikes benifit the sound when placed on wooden floors? Once again just curious.
Play your speaker without spikes on any kind of floor, then without, you be the judge. I think there is an advantage in using spikes. I go one step further and place my speakers on Granite tile.Greg- Bottom
Comment
-
Originally posted by goe2112Just curious, Should an individual who has wooden floors use spikes or not. If so, why ? Is there independant proof that spikes benifit the sound when placed on wooden floors? Once again just curious.
If you need to change wires, or move the speaker, or move the speaker to get to something behind it, then inevitably the spikes will move off the protective cups and rip, scratch, heart drop. Owwwww :a> :a>
The spike set comes with 2 ends. One side is spikes and the other is rubber ends and that is what I am using now.
Even the rollers that the 802D's were delivered with rolled marks in the softwood.
There is and was NO perceived improvement in my system with Spikes. However they did RUIN my floors by accidents over a period of time.- Bottom
Comment
-
Originally posted by Cambs12Gremal,you say you use Aurios under your SACD player,what are they,haven't heard of them,and interested in isolation for my cd player.
After looking at that site type "aurios" into Google and you'll get all sorts of additional information about Aurios.- Bottom
Comment
-
Hi,
You could try MasterBase plates. I am using them for my 803s speakers. It's an improvement in sound quality and they don't ruin the wooden floor!
They are 4x4 cm wide and 1cm thick.
I believe it is a dutch invention, available from: http://www.dynamic-solutions.nl/masterbase.htm
I also use them for decoupling cdplayer and amp.
Regards,
Louis- Bottom
Comment
-
Originally posted by Gremal
Spikes are supposed to minimize the effect of groundborne vibrations on the speaker not, as someone said earlier, to anchor them to the ground. If that was the case, why use a spike? Spikes minimize the floor surface area that is in contact with the speaker.
Somebody then decided that spikes look really cool and started using them elsewhere. Now they charge a lot for them and people have invented "cups" so that they can be used on wood floors. Just put rubber under the speaker to protect the floor and make sure that the oils from the rubber wil not stain the wood.- Bottom
Comment
Comment