Tweet
i have a RSP-1068 so would you set the speakers to small and 100Hz
speakers are 602.5s3 main and rear, lrc60 center and asw650 sub
speakers are 602.5s3 main and rear, lrc60 center and asw650 sub
-
Main Linn Ninka
Center Linn AV5120
Rear Linn Ninka
Sub B&W ASW 650
Processor Rotel RSP-1570
Amp Rotel RMB-1075 -
You would probably want to set the crossover at 60hz, 100hz will make the sub easy to localize, and keep the speakers set to small. Your speakers have a frequency response 3db down @ 50hz. so your sub can handle the bass below that.Robert P. 8)
AKA "Soundgravy"
-
thanks for the reply
would you recommend this for everything home theater and musicMain Linn Ninka
Center Linn AV5120
Rear Linn Ninka
Sub B&W ASW 650
Processor Rotel RSP-1570
Amp Rotel RMB-1075Comment
-
does this apply to the sub crossover settings to set it to 60Main Linn Ninka
Center Linn AV5120
Rear Linn Ninka
Sub B&W ASW 650
Processor Rotel RSP-1570
Amp Rotel RMB-1075Comment
-
Yes, set your mains to 60Hz and also the sub.Originally posted by boxer82003Comment
-
rear and center to 60 as well ?Originally posted by scanidoMain Linn Ninka
Center Linn AV5120
Rear Linn Ninka
Sub B&W ASW 650
Processor Rotel RSP-1570
Amp Rotel RMB-1075Comment
-
That depends, what are your rears?Originally posted by boxer82003Comment
-
His main/rear are both 602.5, so 60 hz for them seems reasonable... Though you might want to try 65 and 70...
maybe 80 hz for the center?, but could also try 85/90...
I'd recommend setting the x-over to 10hz higher than the lowest setting that the speakers can handle, if not 15/20hz higher.
You could try setting the sub to 80, and see how that sounds to you vs 60...Comment
Comment