Help setting up HT

Collapse
This topic is closed.
X
X
 
  • Time
  • Show
Clear All
new posts
  • vonzellen
    Junior Member
    • Jan 2007
    • 1

    #1

    Help setting up HT

    Hi Everyone,

    I have a pair of 802 series 2s that I have been using for stereo for a few years with a Classe amp and preamp. I don't use it much and when I recently upgraded my HT receiver to a Pioneer SVX81 I began to wonder if I should use the 802s in my home theatre and either sell my Paradigm Studio 20s or move them to the surrounds.

    Can you tell me what B & W center channel speaker would work well sonically with the 802s series 2? Also, what B & W surrounds would work well?

    Input greatly appreciated.

    Thanks, Steve
  • mrohde
    Member
    • Jan 2007
    • 52

    #2
    Here is link showing the entire 800 series.


    I have 803's in my HT and use the DS8S's for surround and they are very good.

    I’m not familiar with your Pioneer but would wonder if it has the horse power/ fidelity to do your 802's justice.

    Hope this helps.

    Comment

    • Fife
      Senior Member
      • Apr 2004
      • 141

      #3
      Hi vonzellen,

      If I understand you, you have Matrix 802 Series 2. the matching center is the Matrix HTM and your best bet for surrounds are SCM8 (extremely hard to get) or DS6/7.

      You can get the Matrix HTM cheap on Audiogon and I would recommend you keep your Paradigm Studio 20's for rears until you find a pair of rears.

      You can always use Matrix 805 for the rears if you cant get SCM8's

      Comment

      • akhter
        Senior Member
        • Jun 2005
        • 266

        #4
        Originally posted by vonzellen
        Hi Everyone,

        I have a pair of 802 series 2s that I have been using for stereo for a few years with a Classe amp and preamp. I don't use it much and when I recently upgraded my HT receiver to a Pioneer SVX81 I began to wonder if I should use the 802s in my home theatre and either sell my Paradigm Studio 20s or move them to the surrounds.

        Can you tell me what B & W center channel speaker would work well sonically with the 802s series 2? Also, what B & W surrounds would work well?

        Input greatly appreciated.

        Thanks, Steve
        You should consider using your classe amps with the pre-outs of the pioneer receiver. You should get better sq.

        Comment

        Related Topics

        Collapse

        • rkburton
          801 S2 Matrix for mains - what for side and rear?
          by rkburton
          I'm using my 801 Matrix Series 2 and HTM Matrix for the front 3 speakers.
          Currently using some old Epicures for the rear. Now that I'm upgrading the whole theatre I was looking for suggestions for the side-surrounds and rears.
          Contemplating 805 Matrix for the side vs. more HTMs for the...
          13 April 2005, 17:05 Wednesday
        • Sonny
          800 Matrix
          by Sonny
          I have found a pair for sale. But can not find alot of Info about them. B&W do not list them under there 800 discontinued.( I don't know why, when they were $15K to $17K when new 1990-95) I think that they were 4 omh but could be wrong. Has anyone ever hooked the 800 matrix up to Rotel amps before?...
          23 May 2006, 12:27 Tuesday
        • RichardinCT
          Anyone have info on B&W Bass Extension Filter for Matrix 800 series
          by RichardinCT
          Does anyone have experience with the B&W bass extension filters for the 800 matrix series? I have 802s and am trying to determine my interest in an ebay offering. Thanks!
          12 March 2005, 21:29 Saturday
        • Freddie40
          Matrix 802s2, thinking of rewiring
          by Freddie40
          So,

          I just ordered the North Creek crossovers for my Matrix 802S2 speakers. Which of the following is it best to do?

          1) Install the Northcross crossover as they recommend, leaving in the old wire?

          2) Rewire the 802's from the drivers to the connectors...
          18 January 2010, 19:21 Monday
        • Celt16
          What electronics for B&W Matrix 803S(2) 805 (3) and DS6 (2)?
          by Celt16
          I need to upgrade my electronics for a 7.1 HT featuring all B&W - Matrix 803S fronts, Matrix 805 rears and CC, DS6 surrounds and the awesome ASW850 sub.

          I'm looking at Bryston SP2, 6BSST and 9BSST,
          SP2 Adcom 7805 & a 2-ch Adcom
          Anthem D-1
          Integra RDC7
          ...
          19 December 2006, 11:18 Tuesday
        • Loading...
        • No more items.
        Working...
          Searching...Please wait.
          An unexpected error was returned: 'Your submission could not be processed because you have logged in since the previous page was loaded.

          Please push the back button and reload the previous window.'
          An unexpected error was returned: 'Your submission could not be processed because the token has expired.

          Please push the back button and reload the previous window.'
          An internal error has occurred and the module cannot be displayed.
          There are no results that meet this criteria.
          Search Result for "|||"