Replacement tweeters for B&W 600 Series S3: Are they available?

Collapse
This topic is closed.
X
X
 
  • Time
  • Show
Clear All
new posts
  • nick.h
    Senior Member
    • Jan 2006
    • 171

    #1

    Replacement tweeters for B&W 600 Series S3: Are they available?

    Hi,

    I have a 604 and 603 and 3 of the 4 tweeters have been pushed in, do B&W sell replacements?
  • Bluespower
    Senior Member
    • Sep 2005
    • 149

    #2
    A few years ago I had to look into replacing one on an S2. I think they were about $45 USD.
    Bluespower

    Comment

    • RobP
      Ultra Senior Member
      • Nov 2004
      • 4747

      #3
      They are available, Just contact your dealer, they run $27 ea.
      Robert P. 8)

      AKA "Soundgravy"

      Comment

      • chinets
        Senior Member
        • Jun 2005
        • 855

        #4
        Yes of course, they are available at your dealer ,and also if you contact B&W directly too!! They cost around $30 at your dealer and around $48 from B&W directly!!

        Hope all is solved my friend?

        Good Luck!!
        Cheers!

        Comment

        • kenkkk
          Junior Member
          • Sep 2006
          • 15

          #5
          how about the dust cap protector for the midrange? is it available? i had already changed my tweeter too but am still waiting for the dust cap.... kids!!

          Comment

          • RobP
            Ultra Senior Member
            • Nov 2004
            • 4747

            #6
            I dont think B&W will sell just a dustcap, that involves a little work, you would have to disolve the glue that holds the old dustcap on then re-apply the new cap, this takes a little practice to get it centered and looking like a factory application. I have never asked about re-cone kits. I may have to though............hmmmmm.
            Robert P. 8)

            AKA "Soundgravy"

            Comment

            • chinets
              Senior Member
              • Jun 2005
              • 855

              #7
              I believe soungravy is right!!!

              You'll have to put your dustcap together yourself I am afraid!!

              Best bet is to contact B&W technical support and ask them to check with their spare part division ,and you might be quite surprised that they might sell you one, or maybe have one at hand and give it to you ,but you'll have yo pay for the shipment. It has happened to me with other small parts, that I thought could not be replaced or purchased. B&W surprised me, and had them for me in 2 weeks!!

              Never knpw your luck, so it is worth giving them a call!!

              Good Luck!!
              Cheers

              Comment

              • nick.h
                Senior Member
                • Jan 2006
                • 171

                #8
                Hi All,

                thanks for your reply's I have contacted a dealer and going to place an order this week.

                Are they easy to change?

                Comment

                • chinets
                  Senior Member
                  • Jun 2005
                  • 855

                  #9
                  Yes, They are :T

                  Comment

                  Related Topics

                  Collapse

                  • TurboFC3S
                    What 104mm flange tweeters do I NEED to hear?
                    by TurboFC3S
                    I'm going to try something new. I have a nice pair of cabs built, currently housing a GR A/V3 MTM in the top section, and a pair of M-165x's in the bottom. I've been very impressed with these speakers, but of course anything can be improved So here's my plan ...

                    I got some of the...
                    18 July 2007, 14:28 Wednesday
                  • jdmlight
                    Desk speakers with Linaeum tweeters
                    by jdmlight
                    Hello all, I just registered but have been browsing these forums and their massive wealth of information for quite a while. (There's a TON of good stuff here 8O :T)

                    Last summer I rebuilt a pair of old Optimus (Realistic? I don't remember, one of those Ratshack brands from around the...
                    07 February 2010, 19:39 Sunday
                  • bobhowell
                    Killed my first Tweeter today!! What to do?
                    by bobhowell
                    I am building Zaph's Hi Vi/ Vifa 5. No more tweeters available( D27SG-05), but Madisound will sell me a similar model with the same voice coil for 60% of retail. I pull out the voice coil and use it as replacement. The rest of the tweeter is a paper weight. Sounds fair. They stock the voice coil alone...
                    29 September 2008, 19:58 Monday
                  • Lex
                    Replacement warranties, what's fair?
                    by Lex
                    As some of you may know, i recently had a Samsung hi-def Directv receiver go out on me. It actually started smoking.

                    It so happens, with the threat of the dish getting hit by lightning, etc... I put the Best Buy warranty on my 600.00 piece. The warranty cost me 79.00. Now, of course,...
                    25 February 2005, 14:20 Friday
                  • weijst
                    RSP-1068 replacement...
                    by weijst
                    Hi guys,

                    It's been a while since I've posted on the Rotel forum. Nice to see the club is still alive and kicking!

                    I'm considering a pre/pro replacement, on which I'm hoping to receive some feedback.

                    I'm being offered a nice deal on a matching Classe SSP-...
                    06 December 2009, 18:45 Sunday
                  • Loading...
                  • No more items.
                  Working...
                    Searching...Please wait.
                    An unexpected error was returned: 'Your submission could not be processed because you have logged in since the previous page was loaded.

                    Please push the back button and reload the previous window.'
                    An unexpected error was returned: 'Your submission could not be processed because the token has expired.

                    Please push the back button and reload the previous window.'
                    An internal error has occurred and the module cannot be displayed.
                    There are no results that meet this criteria.
                    Search Result for "|||"