Amps to create "revelation" on 802D / 800D

Collapse
This topic is closed.
X
X
 
  • Time
  • Show
Clear All
new posts
  • RNKC
    Senior Member
    • Jun 2005
    • 197

    #46
    I truely love the sound from my Mark Levinson 432 (400w x 2). I've listened to Classe in the store but for my tastes I prefer the Levinson sound.

    Comment

    • dknightd
      Senior Member
      • Mar 2006
      • 620

      #47
      Originally posted by Blazar
      There is no amp that will create a "revelation" with these speakers...

      The revelation comes from room treatment.... of this I am absolutely certain with my experiences so far. The more bass traps, absorption, and diffusion modifications I make, the better the sound is getting.
      I don't have these speakers in my house. Too much money for me.

      But I want to echo Blazar's opinion. Room treatments make a HUGE difference. From a sound standpoint I'd say 1/3 speaker, 1/3 electronics, 1/3 room.

      Comment

      • Rolex
        Senior Member
        • Mar 2005
        • 386

        #48
        I'm a little surprised there hasn't been much talk of Jeff Rowland with B&W. That combo sounded very good, I thought.

        My friend had 802D's with KW500. Then went to Mac integrated 2275. Better in almost all regards, then went to mac separates. 402 amp and c2200 pre amp.

        I'd take the amp and pre amp from mac over the kw500, which I like.

        Comment

        • peter clarke
          Member
          • Oct 2006
          • 53

          #49
          ???VTL with 800D's

          Originally posted by peter clarke
          am using kW500 with 800D's adding echobusters full treatment soon and auditioning kW750 in bi-amped mode soon
          Dear soundgravy, How do the VTL's perform?????

          Comment

          • Jesse111
            Senior Member
            • Jul 2005
            • 335

            #50
            Mac 501 is magnificent with the 800D. I'd imagine it's even better with the 802D.

            Comment

            • RobP
              Ultra Senior Member
              • Nov 2004
              • 4747

              #51
              Originally posted by peter clarke
              Dear soundgravy, How do the VTL's perform?????
              I have never actually heard the 800d's on VTL amps, but I did listen to the 802d's on VTL power and it sounded pretty good. Not as good as the Classe CAM400's IMO though.
              Robert P. 8)

              AKA "Soundgravy"

              Comment

              • Angioguy
                Senior Member
                • Nov 2005
                • 100

                #52
                Judging from these many responses, I think it's safe to say that many amps would do the job-- very well... why not find 5 or so that fit your budget and audition them? I listened to Jeff Rowland, Classe, Levinson, Krell and McIntosh with my 802D's and decided on the Mac.
                B&W 802D, HTMS-4; Velodyne DD-12, Arcam AVR-300, McIntosh MC-402, Musical Fidelity KW-SACD, Pioneer Elite

                "... these go to eleven."

                Comment

                • jack d
                  Senior Member
                  • Sep 2006
                  • 184

                  #53
                  What do you guys think about the Anthem P2? I didn't see anyone mention it so far.

                  Comment

                  • twitch54
                    Senior Member
                    • Apr 2006
                    • 340

                    #54
                    Originally posted by jack d
                    What do you guys think about the Anthem P2? I didn't see anyone mention it so far.
                    I think for good reason....... IMHO Anthem does just dandy on HT but when it comes to serious two channel listening there is better stuff out there, alot of which has been named in this thread. My vote for SS goes to Plinius and in the world of Tubes I must say after hearing these speakers recently at Overture Audio in De. being driven by the new ARC Ref amps.....Wow !!
                    Dave

                    Comment

                    • juiceman
                      Junior Member
                      • Dec 2006
                      • 2

                      #55
                      xxxx
                      Last edited by juiceman; 17 December 2006, 16:41 Sunday. Reason: need to delete. posted twice

                      Comment

                      • juiceman
                        Junior Member
                        • Dec 2006
                        • 2

                        #56
                        Originally posted by Indytown
                        I've been trying to find a dealer that has the new Bel Canto 500 watt mono's with the new ICE technology.

                        Has anyone listened to them yet?

                        Indy,

                        I have been running the Bel Canto e.One Ref1000 monoblocks with my 802Ds for about a year now. I got the the Bel Cantos as soon as they came out. I have a Mark Levinson 380s pre-amp and 360S DAC as the primary sources.

                        Overall I have been extremely happy with them. They drive the 802's with ease and amazing clarity. The transient response is amazing. My only complaint is there is a touch of coolness in the treble and upper midrange. However like a lot of affects, this is very slight and depends on the source material.

                        The additional pluses is the small sizes of the monoblocks and their efficiency. As a PWM amp, they run super cool even at high output levels.

                        If I were to make a change, it would be to the much more expensive Levinson 436 monoblocks. Alot of that has to do with me being a lifelong fan of the Levinson sound.

                        Justin

                        Comment

                        • Kal Rubinson
                          Super Senior Member
                          • Mar 2006
                          • 2109

                          #57
                          Originally posted by juiceman
                          I have been running the Bel Canto e.One Ref1000 monoblocks with my 802Ds for about a year now.
                          Me, too. Other amps as well.

                          Kal
                          Kal Rubinson
                          _______________________________
                          "Music in the Round"
                          Senior Contributing Editor, Stereophile
                          http://forum.stereophile.com/category/music-round

                          Comment

                          • Indytown
                            Senior Member
                            • Apr 2005
                            • 171

                            #58
                            Originally posted by juiceman
                            Indy,

                            I have been running the Bel Canto e.One Ref1000 monoblocks with my 802Ds for about a year now. I got the the Bel Cantos as soon as they came out. I have a Mark Levinson 380s pre-amp and 360S DAC as the primary sources.

                            Overall I have been extremely happy with them. They drive the 802's with ease and amazing clarity. The transient response is amazing. My only complaint is there is a touch of coolness in the treble and upper midrange. However like a lot of affects, this is very slight and depends on the source material.

                            The additional pluses is the small sizes of the monoblocks and their efficiency. As a PWM amp, they run super cool even at high output levels.

                            If I were to make a change, it would be to the much more expensive Levinson 436 monoblocks. Alot of that has to do with me being a lifelong fan of the Levinson sound.

                            Justin
                            Juiceman,

                            Thanks for the insight to the Bel's. I had a chance to listen to the Jeff Roland digital mono's, felt the same way a "a touch of coolness".

                            I went the route of Mac MC501 mono's. They run very cool and sound superb with BW800D.


                            Happy holiday's and New Year.

                            Indy

                            Comment

                            • Pieter Stolk
                              Junior Member
                              • Jan 2007
                              • 17

                              #59
                              Hi,

                              Has anybody heard the B&W 802D's with Pass Labs (f.e. X250.5) and/or 2x Bryston 7BSST's ?

                              Comment

                              Related Topics

                              Collapse

                              • kmcheng
                                805S + Bel Canto e.One S300i
                                by kmcheng
                                Does anyone have any experience pairing the new Bel Canto digital amps with the B&W 800 series speakers?

                                I have been exploring better amplication after I got my 805S. Currently I have a Cambridge Audio 540R receiver (100W into 2 channels 8ohm). The receiver is fine for HT but really...
                                02 April 2008, 10:51 Wednesday
                              • Jeff Mayer
                                Bel Canto Pre2 preamp for stereo upgrade?
                                by Jeff Mayer
                                Hi all,

                                I'd appreciate any collective wisdom on the Bel Canto Pre2 stereo preamp as a significant upgrade over my Onkyo 797 receiver. I'm using the onkyo's preout's into a Parasound a51 amplifier. I feel that for movies the onkyo is fine but for stereo it is lacking. I listen to at...
                                17 April 2006, 15:09 Monday
                              • kmcheng
                                PV1 Speaker-wire connection - Help please!
                                by kmcheng
                                Last week I got an integrated amplifier (Bel Canto e.One S300i) to power my 805S speakers. I hooked up the speakers, and I was very happy. But I had not connected my two PV1 subwoofers to the amp yet. I am now considering using the speaker-wire connections to hook up the PV1 with the Bel Canto. However,...
                                24 April 2008, 17:23 Thursday
                              • MrWhite
                                802D amp upgrade from rb-1080 to ??? for little $$$
                                by MrWhite
                                Currently I have my pair of 802D's driven by a Rotel RB-1080. It works well enough but I have heard these speakers only get better as the available power on hand goes up. And, since I use them for both music and HT with no sub, I do get a little worried during longer, louder listening session and during...
                                14 September 2008, 14:47 Sunday
                              • sikoniko
                                802d impressions, krell vs nuforce ref9
                                by sikoniko
                                Well, I am moving into my new house and most of the place is still in boxes. I did hook up my sherwood and my brand new ref9's to my N802's out in the garage. The room is most likely an acoustical nightmare at the moment, but I will be enclosing it in the coming months/weeks and getting it finished....
                                25 November 2005, 11:15 Friday
                              • Loading...
                              • No more items.
                              Working...
                                Searching...Please wait.
                                An unexpected error was returned: 'Your submission could not be processed because you have logged in since the previous page was loaded.

                                Please push the back button and reload the previous window.'
                                An unexpected error was returned: 'Your submission could not be processed because the token has expired.

                                Please push the back button and reload the previous window.'
                                An internal error has occurred and the module cannot be displayed.
                                There are no results that meet this criteria.
                                Search Result for "|||"