Anyone know what spades will fit the binding posts on the 703's? Would i need the 8mm or 10mm opening size?
B&W 703 SPADE SIZE?
Collapse
This topic is closed.
X
X
-
Do the 703's use the same WBT binding posts as the Nautilus line? If so, I believe those WBT binding posts accept 6mm and 8mm spades.
Go to http://www.wbtusa.com and see if you can find the binding post that matches the one on your 703's and the check the spec sheet.- Bottom
Comment
-
- Bottom
Comment
-
I dont think the 700 series uses WBT connectors, but uses the same ones as on the CDM & 600 series. (look at the 360° picture of the 705 at B&W site)
They accept both 6 and 8 mm spades, as there is a thick and a thinner part in the binding posts (where the loose ring is).
Or that's the way I remember it, I don't have them myself but I'm quite sure that's the way it is.- Bottom
Comment
-
On my 600 series b&ws, i had trouble with both size WBT spades. If I removed the bridge and wired between the Hi&Lo posts I could use the spades but i found the connections to be lacking.
Luckily Lex bent over backwards and swapped out my connectors several times. I ended up using locking bananas, and I am MUCH happier. The connections are far more secure than I ever got with WBT spades, and i get to keep my bridges.- Bottom
Comment
Comment