So the workmen knocked one of my Zaph Seas L18 / Seas 27TBFCG off its stand onto its face scraping the side, denting the tweeter and loosing the phase plug on the L18. I can re-order the L18 from Madisound , but the 27TBFCG is currently out of stock. If I have to I can order from Stolen, but I would prefer a cheaper source. Anyone know of one?
-
Hi all,
Just registered here. I have a question abbout one of John Krutke his popular designs, the Seas L18 / Seas 27TBFCG.
The website Zaph Audio is very complete but I can't find one important detail for the Seas L18 / Seas 27TBFCG design. I can't find the exact baffle... -
I am building the L18/27TBFCG Seas speakers that John Krutke designed and I have a few questions. This is my first build using a crossover--I have built a BIB 168EZ, Fonken 127 and a pair of Rythmik 15" subs.
Questions are:
1. I have a 2.25 mH steel core inductor from Madisound... -
Hello,
This is my first post (so be kind).
I have been looking to build Zaph's SEAS "all metal" system for some time now, I was all set to go till the SEAS importer (I am from Aus BTW) sent me an email saying that they do not have stock of the L18 and they are not going... -
Okay, I’m trying to get the combined frequency response for a couple of seas L18 drivers in a 60L vented box tuned to 34 Hz.
I traced Zaph's infinite baffle FR and Impedance measurements and simulated the infinite baffle with unibox (using a 1000L sealed box). Then simulated the FR... -
I have spent the last year with the Seas L18 in a .5 cu ft enclosure from Parts Express as depicted by John Krutke on his website. He later mentioned that if he had to do it again he would increase interior volume.
That said, what would your recommendations be for internal volume/tuning?...
Comment