Richard Grey 600s

[Nolan B]

I current own a 600s and noticed on the back there is something call a "20 amp IEC connector" and a swtich for "fast and slow".

Tomorrow and electrician is comming to install a deditacted 20 amp circuit for my HT. Do I need to do something with this swtch? can someone shed some light on what it is?

thanks

[dyazdani]

Looking on the RGPC website, the only switch on the back of the 600S is an on/off switch.

I think you looked at the fuse holder which says "fast blow" not "fast slow" - it could be mistaken for a switch I suppose. The line in it is a groove so you can pop out the fuse.

[Nolan B]

Looking on the RGPC website, the only switch on the back of the 600S is an on/off switch.

I think you looked at the fuse holder which says "fast blow" not "fast slow" - it could be mistaken for a switch I suppose. The line in it is a groove so you can pop out the fuse.

I think yo are right. I think I jst dont understand the meaning off the IC connector.

[dyazdani]

The 20amp IEC connecter is just used to connect the 600S to the wall. There is also a 15 amp IEC connector like you'll find on most audio gear and computer power supplies, etc.

It will come with a power cord with a wall plug on one end and a female 20 amp IEC connector on the other. You can't plug a 15 amp IEC into a 20 amp.