I just replaced my Rotel RMB-1095 with a NAD S250 and noticed on the back that the NAD has gain controls for each channel. Do I set the controls to max which is the THX setting or min to minimize background noise.
ht_addict
ht_addict
-
I am a longtime lurker on this forum but now I have a couple of questions. I am the happy owner of a C1, A51, and A21. Originally I had them set up for a 7.1 system, but recently I have experimented with keeping the C1/A51 in a 5.1 system (partly for the negative WAF of the two "extra" speakers... -
I've been enjoying my A21 tremendously for 2 channel music for the past couple of months until now.....
I've suddenly begun to notice that the output from the right channel is significantly lower than the left. When the amp is first turned on and music played, the right channel is significantly... -
Just ordered; should be in by Monday. These are just starting to become available in the US. I've been looking for something with above average performance but not over $2K, unlike my last two DACs, which while quite satisfactory from a performance perspective, are rather pricey for most of my friends.... -
I'm sure everybody will be excited to know that the new Classic gear from Parasound is now available to order. They released it this week with much anticipation.
A typical 7 channel setup will consist of the 7100, 5125 and 2125. This will cost $5,500 MSRP and be fully THX Ultra II Certified.... -
From the news article here:
http://www.gspr.com/parasound/jc2bp.html
Parasound Upgrades its Classic Halo JC 2 Preamp with Added Home Theater Bypass
The new Parasound Halo JC 2 BP allows audiophiles to use their high-end...
Comment