Help!! Denon 1804 receiver for klipsch speakers?

[caveboy]

The power handling of klipsch reference bookshelf speaker RSX-5 is 75 watts continuous (300 watts peak).

Klipsch Rsx-5 specfication as below

FREQUENCY RESPONSE:
92Hz-20kHz ±3dB
SENSITIVITY:
93dB @ 2.83V / 1 meter
POWER HANDLING:
75 watts continuous (300 watts peak)
NOMINAL IMPEDANCE:
8 ohms compatible
ENCLOSURE TYPE:
Bass-reflex via rear-firing port
DRIVE COMPONENTS:
Two-way system using one 1" (2.54cm) magnetically shielded, titanium dome compression driver tweeter with a integral round 90° Tractrix® Horn and one 5.25" (13.34cm) magnetically shielded, aluminu
TWEETER:
One 1" (2.54cm) titanium dome compression driver
HF CROSSOVER:
2000 Hz
WOOFER:
One 5.25" (13.34cm) Cerametallic® cone
INPUT CONNECTIONS:
One set of binding post speaker terminals
DIMENSIONS:
12.5" (31.8cm) x 6.5" (16.5cm) x 9" (22.9cm)
WEIGHT:
7 lbs. (2.7kg)
ENCLOSURE MATERIAL:
ABS, cast aluminum baffle and base
FINISHES:
Black or Silver
MOUNTING:
Base swivels 360° for on-wall mounting via keyholes
YEARS BUILT:
2003 -

Would the denon AVR-1804 receiver be able to power the speakers??

[Kevin P]

The AVR-1804 is rated at 90 watts per channel, so it should drive the RSX-5s no problem. With a 93 dB sensitivity you don't need a lot of power to drive those speakers. You'll be able to push 111+ dB SPL at 1 meter, more than enough for most home theaters.