Hi, just wondering out there if anyone has connected a two channel amp into one speaker that has 4 binding posts..Just picked up a T-amp for my main fronts and they are excellent but in Home theatre use they overpower my centre channel..so I'm thinking of getting another one just for my center channel..any thoughts out there??
-
-
:scratchhead:
I would say hold off on that and calibrate your system again. I have seen people put seperate amps on just the mains. (For 2 chan stuff) and also use the same set up for HT. You just have to calibrate your system so that mains do not over power your center. And when you listen to 2 Chan stuff you can crank the heck out of it.
That is what I would do.
I am sure some of the heavy hitters here will weigh in on Bi-Amping. I don't have anything in my set up that is bi-amped.The Bitterness of poor quality last longer than the joy of low prices. -
Thanks for the info. on that Snap..but I tried that and increased the db on my centre channel but unfortuntely the timbre matching is off.. I'm using my receiver as a pre-amp and it throws off the whole system since my T-amp produces a different sound (great though) than the rest of the speakers..so do you think using a two channel on one speaker would work?? and how would you go about the "hook-up" on something like that??Comment
-
what about just using one chan? Or running a small amp in mono to the center chan?
To be honest I am not a Bi-amping expert.
So my only 2 thoughts, are:
1. Only use 1 of the 2 chan
2. Run the amp in bridged mono to the center.
my .02The Bitterness of poor quality last longer than the joy of low prices.Comment
-
This one is being released 18 April. Looks very interesting--we get Jackie Chan AND Jet Li in one movie! Two masters together. We'll see if Jackie's getting old in comparison. -
I first met Jackie on "Cannonball Run". He had a very minor role and I don't believe he could speak any English at that time. However, he is such a natural born clown he had everybody laughing the little bit of time he was on the set. At that time I had never seen a Jackie Chan movie. Later...13 September 2016, 12:59 Tuesday -
I was wondering what methods, test CDs, etc, people are using to properly calibrate a sub woofer for two channel? I'm using the bass management in my receiver to set the low pass for my sub woofer at 80hz. The high pass for my mains is also at the same frequency.
Is it as simple as playing... -
Hello Folks,
I recently picked up a Denon DVD-3910. It's connected to a Panasonic CT-30WX54 HDTV monitor. I use the Digital Video Essentials DVD to set up the picture.
Both the 3910 and the Panasonic offer a wide range of calibration options (the 3910 has more, with... -
I just hooked up my trigger for he first time. The C1 to A51, using the on-off trigger, works fine. I also want to use a trigger to turn on a Panamax 5400-EX power conditioner that has the rest of the equipment connected to it. Both the C1 and the Panamax use a standard 3.5 mm mini-plug (unlike the...
Comment