The importance of DC power

Collapse
This topic is closed.
X
X
 
  • Time
  • Show
Clear All
new posts
  • LarryB
    Member
    • Dec 2001
    • 81

    #1

    The importance of DC power

    [I posted this at HTT, but it's probably more appropriate here.)

    From time to time, I (and others) have emphasized the importance of clean DC power to musicality, and the incredible efforts expended by high-end manufacturers in pursuit of this goal. The following is one reviewer's impression of a power upgrade to an Ayre preamplifier. I found it quite interesting and hope you do, too.


    Larry
  • JonMarsh
    Mad Max Moderator
    • Aug 2000
    • 16058

    #2
    The X series upgrade to Ayre products encompasses a variety of modifications, including revision to the overall grounding system, and the addition of a power filter which improves common mode isolation. Additionally, there are some changes to the RFI suppression techniques used. DC power is part of the picture, but noise isolation from the power and signal ground is the overall thrust of that update.

    Your point is well taken, because most systems and components, in comparison, pay little attention to these details. The Ayre preamps and amplifiers all use a fully balanced signal path input to outputs. They do have singlened inputs, but they feed balanced circuits which derive a ground reference at the component input.

    Best regards,

    Jon




    Earth First!
    _______________________________
    We'll screw up the other planets later....
    the AudioWorx
    Natalie P
    M8ta
    Modula Neo DCC
    Modula MT XE
    Modula Xtreme
    Isiris
    Wavecor Ardent

    SMJ
    Minerva Monitor
    Calliope
    Ardent D

    In Development...
    Isiris Mk II updates- in final test stage!
    Obi-Wan
    Saint-Saëns Symphonique/AKA SMJ-40
    Modula PWB
    Calliope CC Supreme
    Natalie P Ultra
    Natalie P Supreme
    Janus BP1 Sub


    Resistance is not futile, it is Volts divided by Amperes...
    Just ask Mr. Ohm....

    Comment

    • Lex
      Ultra Senior Member
      • Apr 2001
      • 27460

      #3
      Yikes, nearly 500 bucks for a power supply. But I suppose the value of clean power at any level (ac or dc) cannot be discounted. I don't mean that literally, like 400 instead of 500. Rather, it's important to have good clean power, or what you process in the end, can be no better.

      and your right Larry, that does belong in a dedicated 2 channel area.

      Lex
      Doug
      "I'm out there Jerry, and I'm loving every minute of it!" - Kramer

      Comment

      • Bob
        Senior Member
        • Jul 2000
        • 800

        #4
        Have you ever noticed that even the lowest grade car radio in the lowest grade rental car in the worst third world country gets perfect AM reception and the most expensive audiophile AM/FM tuner gets good FM but static filled AM? My understanding is that this is the difference between AC and DC power in audio.

        Comment

        • LarryB
          Member
          • Dec 2001
          • 81

          #5
          Jon:

          Within the next few days I will get my D1 back with (1) the latest upgrades, and (2) Charlie's DACs. Can't wait to hear it.

          Larry

          P.S. I also got a new preamp, and will probably sell the Levinson 380.

          Comment

          • JonMarsh
            Mad Max Moderator
            • Aug 2000
            • 16058

            #6
            Larry,

            I believe you're in for a real treat! :B It's certainly one of life's nice pleasures to get an expected and worthwhile upgrade to your system. I suspect you'll really enjoy this one.

            Best regards,

            Jon




            Earth First!
            _______________________________
            We'll screw up the other planets later....
            the AudioWorx
            Natalie P
            M8ta
            Modula Neo DCC
            Modula MT XE
            Modula Xtreme
            Isiris
            Wavecor Ardent

            SMJ
            Minerva Monitor
            Calliope
            Ardent D

            In Development...
            Isiris Mk II updates- in final test stage!
            Obi-Wan
            Saint-Saëns Symphonique/AKA SMJ-40
            Modula PWB
            Calliope CC Supreme
            Natalie P Ultra
            Natalie P Supreme
            Janus BP1 Sub


            Resistance is not futile, it is Volts divided by Amperes...
            Just ask Mr. Ohm....

            Comment

            Related Topics

            Collapse

            • RebelMan
              B&W 800's Better with Ayre or Classe'?
              by RebelMan
              There has been some personal interest in my recent visit with Ayre and Classe' that I thought I would share with the people here. It is a bit lengthy but I hope you find it a useful read just the same.

              Purpose:

              You are probably wondering why I would even bother to demo...
              08 May 2006, 15:03 Monday
            • Briz vegas
              B&W headphones
              by Briz vegas
              I raised this in the thread about B&Ws new product, which turned out to be a sound bar. (insert snore here)

              The more I think about it the more I think that B&W is moving away from its traditional market. How many audiophiles would consider a soundbar as their solution, how many...
              16 January 2009, 18:26 Friday
            • JonMarsh
              Let's be bad guys... Who's heard the Ayre VX-5 or AX-5?
              by JonMarsh
              I've left well enough alone in Audio Hideout for too long- time to stir up a little trouble...

              Let's see a show of hands first... how may of you have heard of Dick Baker?

              OK, maybe you haven't heard of him, but you've heard of a Baker Clamp? (If you've ever designed switch...
              12 October 2013, 14:57 Saturday
            • JonMarsh
              Ayre V5 amplifier
              by JonMarsh
              In the midst of last weeks tragic events, I had a few uplifiting moments, including receiving the Ayre V5 amplifier I had on order.



              This is a 150W/ch @8 ohms, 300W/ch @4 ohm rated amplifier, using no loop feedback. Unlike some amplifiers, such as the Monarchy models, which...
              18 September 2001, 10:53 Tuesday
            • snowball
              Diferent brands for Source to Pre and Power?
              by snowball
              From your experience is using a source of a different brand with pre-power amplifiers of the same brand a bad choice?

              ie:

              ayre cx-7e and classe?

              classe cp 700 and ayre?

              rcd-1072 and ayre?

              ayre cx-7e and rotel?
              17 March 2006, 09:12 Friday
            • Loading...
            • No more items.
            Working...
              Searching...Please wait.
              An unexpected error was returned: 'Your submission could not be processed because you have logged in since the previous page was loaded.

              Please push the back button and reload the previous window.'
              An unexpected error was returned: 'Your submission could not be processed because the token has expired.

              Please push the back button and reload the previous window.'
              An internal error has occurred and the module cannot be displayed.
              There are no results that meet this criteria.
              Search Result for "|||"