Audiolab + NAD, good maching ?

Collapse
This topic is closed.
X
X
 
  • Time
  • Show
Clear All
new posts
  • Audiophile100%
    Senior Member
    • Apr 2005
    • 128

    Audiolab + NAD, good maching ?

    hi guys,
    i need your help.
    i'm thinking to buy pre+power amp combo

    my idea is :
    - preamplifier Audiolab 8200q
    - poweramp NAD S200

    what sound it should give ?, is good maching ?
    thank you
  • wkhanna
    Grumpy Old Super Moderator Emeritus
    • Jan 2006
    • 5673

    #2
    first off....i have never heard either unit...

    based on some quick googling, i would expect a decent result, depending on impedance-matching & the type & sensitivity of the speakers you are using.

    the NAD will have good reserve & head-room for dynamics, though i would rather see a damping factor higher than 200 if using speakers on the lower side of 90 dB.

    one nice feature on the Audiolab is the gain trim.
    i recommend taking advantage of this feature by setting your gain as low as possible while still achieving the highest dynamics & SPL you need for your normal listening.
    this will limit distortion from the volume pot & associated circuitry, basically running the pre near to passive, with as little gain as possible.

    my C-19 pre has this feature.
    i run at Zero gain.
    my volume is set between 60 & 90% depending on source voltage (e.g. fm tuner, turntable, DAC, etc).
    _


    Bill

    Practicing Curmudgeon & Audio Snob
    ....just an "ON" switch, Please!

    FinleyAudio

    Comment

    • Audiophile100%
      Senior Member
      • Apr 2005
      • 128

      #3
      thank you very much bill.
      i'm scared because peoples says the audiolab is neutral/clinical, however i hope someone who know the two pieces could help me

      Comment

      • wkhanna
        Grumpy Old Super Moderator Emeritus
        • Jan 2006
        • 5673

        #4
        you are welcome.

        what speakers are you using?
        what is the room like?
        _


        Bill

        Practicing Curmudgeon & Audio Snob
        ....just an "ON" switch, Please!

        FinleyAudio

        Comment

        • wkhanna
          Grumpy Old Super Moderator Emeritus
          • Jan 2006
          • 5673

          #5
          forgot to ask.....

          what source equipment are you using?
          _


          Bill

          Practicing Curmudgeon & Audio Snob
          ....just an "ON" switch, Please!

          FinleyAudio

          Comment

          • Audiophile100%
            Senior Member
            • Apr 2005
            • 128

            #6
            my speaker are big diy project very difficul to lod them
            cd player is onkyo c-7030
            the room is rectangular,34mq

            Comment

            • wkhanna
              Grumpy Old Super Moderator Emeritus
              • Jan 2006
              • 5673

              #7
              what pre & amp?

              how do you describe the general sound of your current system?
              _


              Bill

              Practicing Curmudgeon & Audio Snob
              ....just an "ON" switch, Please!

              FinleyAudio

              Comment

              • Audiophile100%
                Senior Member
                • Apr 2005
                • 128

                #8
                i have not pre & amp

                Comment

                • wkhanna
                  Grumpy Old Super Moderator Emeritus
                  • Jan 2006
                  • 5673

                  #9
                  if you are getting a good deal on the equipment (i assume you are buying used) then i say go for it.
                  you can always re-sell in the future.....
                  _


                  Bill

                  Practicing Curmudgeon & Audio Snob
                  ....just an "ON" switch, Please!

                  FinleyAudio

                  Comment

                  • Audiophile100%
                    Senior Member
                    • Apr 2005
                    • 128

                    #10
                    sure i could re-sell in future, but i don't want do that!, i would a good definitive solution, not the best but almost definitive.
                    do you understand me ?
                    i have a doubt on audiolab 8200q, sincw some says that it is clinical, is this true ?
                    also the rotel rhb10 vs nad s200, which should be better ?
                    excuse my questions, i need help

                    i hope some one in the forum has tried them and comment my discussion

                    Comment

                    • Alaric
                      Ultra Senior Member
                      • Jan 2006
                      • 4143

                      #11
                      "Clinical" is sometimes used by people who find accuracy isn't necessarily a good thing. I could describe Bryston amplifiers as clinical sounding (and I do), but they only sound that way in some systems. I think the OP is on the right track looking for synergy between components. I haven't heard the amplifier in question, but based on the NAD amplifiers I've heard (quite a few) I would think there wouldn't be a problem with a neutral sounding pre amp. As an example, I'm not a fan of overly "lush" sounding equipment up the chain from a NAD amplifier. I have heard a tube pre amp with a NAD amp and didn't care for it. It had detail, etc., but it just sounded like the music couldn't color within the lines if that makes any sense.
                      Lee

                      Marantz PM7200-RIP
                      Marantz PM-KI Pearl
                      Schiit Modi 3
                      Marantz CD5005
                      Paradigm Studio 60 v.3

                      Comment

                      • Audiophile100%
                        Senior Member
                        • Apr 2005
                        • 128

                        #12
                        thank you lee,
                        what do you mean with "I think the OP is on the right track looking for synergy between components" ?

                        so you consider nad amp warm sounding ?, or with "lush" you mean open/clear sound ?

                        Comment

                        Working...
                        Searching...Please wait.
                        An unexpected error was returned: 'Your submission could not be processed because you have logged in since the previous page was loaded.

                        Please push the back button and reload the previous window.'
                        An unexpected error was returned: 'Your submission could not be processed because the token has expired.

                        Please push the back button and reload the previous window.'
                        An internal error has occurred and the module cannot be displayed.
                        There are no results that meet this criteria.
                        Search Result for "|||"