CD player to match my Parasound C2 and replace Arcam DV89plus

Collapse
This topic is closed.
X
X
 
  • Time
  • Show
Clear All
new posts
  • MIB
    Junior Member
    • Apr 2004
    • 29

    #1

    CD player to match my Parasound C2 and replace Arcam DV89plus

    CD player to match my Parasound C2 and replace Arcam DV89plus.

    In at a dealer today, I mentioned I had a parasound C2 processor and was looking for more for 2 channel music and was my Arcam DV89+ a match for the c2.

    He said I could get a big improvement from some sub £700 players.

    He mentioned Denon and Yamaha among a few.
    He suggested the parasound was being let down badly by the arcam.

    Can I have some suggestions of new and second hand models to look at to match my processor or is he being over enthusiastic!
  • bigburner
    Super Senior Member
    • May 2005
    • 2649

    #2
    I haven't come across anyone in this forum say anything bad about the Rotel RCD-1072. In fact most people say very positive things.



    In Blighty I imagine it would cost about 500 quid.

    Comment

    Related Topics

    Collapse

    • MIB
      CD player to match my Parasound C2 and replace Arcam DV89plus
      by MIB
      CD player to match my Parasound C2 and replace Arcam DV89plus.

      In at a dealer today, I mentioned I had a parasound C2 processor and was looking for more for 2 channel music and was my Arcam DV89+ a match for the c2.

      He said I could get a big improvement from some sub £700...
      23 December 2005, 17:51 Friday
    • Rolyasm
      Arcam, Parasound or Sherwood Newcastle. Opinions.
      by Rolyasm
      I have narrowed it down to three preprocessors and will be purchasing this week. 90%HT. Undecided on amp yet. Speakers are M&K, either s-150 or s-250. 4 ohm speakers. http://www.mksound.com/satellite_speakers.php
      Models are Arcam Avp700, Sherwood Newcastle P-965 or Parasound 7100. I...
      10 July 2006, 16:19 Monday
    • DrBoom
      Shootout : Parasound C2 vs Rotel 1098 (long)
      by DrBoom
      Well, it's been almost 2 months now that I've lived with both my Rotel RSP1098 and my Parasound C2 and the time for deciding which I'm going to keep is almost at hand.(not that I HAVE to decide now for some reason, but I'd hate to end up with 2 processors permanently)
      I actually own both of them,...
      20 July 2004, 16:16 Tuesday
    • msasseville
      Parasound and Arcam: good combination?
      by msasseville
      Hi there,
      I was wondering between Halo A51 and Hallo A52. I think I made my mind about this. Now, something else:

      I have an Arcam AVR 300, (100 Watts). Is there any one who have tried to match this AVR (as a preamp) to the Halo Poweramp (A51 or A52)? If so, how is it? I mean,...
      28 August 2008, 08:43 Thursday
    • gianni
      Arcam or Rotel?
      by gianni
      Need some input:

      I'm looking for a new digital transport for my system. I currently have a Rotel RSX-1055 powering M&K 850's. My sources consist of an older 300 pound Denon CD only player (DCD-1520) and a Sony SACD/DVD player (non progressive).
      My biggest desire is to see...
      18 June 2005, 03:34 Saturday
    • Loading...
    • No more items.
    Working...
      Searching...Please wait.
      An unexpected error was returned: 'Your submission could not be processed because you have logged in since the previous page was loaded.

      Please push the back button and reload the previous window.'
      An unexpected error was returned: 'Your submission could not be processed because the token has expired.

      Please push the back button and reload the previous window.'
      An internal error has occurred and the module cannot be displayed.
      There are no results that meet this criteria.
      Search Result for "|||"