Position / view / inside of the cabinet and start phase of project for the stands,on to the rear speakers ;
Attached Files
-
-
and more;
P.S.
This is the address of my group, here there are no limitations on posting your DIY- Audio Ideas in photos, I would be very pleased if we met there! In this group , commercial posts are not allowed!
Thank you for your attention!
Joro
Comment
-
The front of the stand is treated with 3 mm MDF;
Next part - painting with acrylic spray, I need to get an idea of the lines of detail (they are many) and how they will look, with the finish acrylic auto varnish /poz 5/;Attached FilesComment
-
-
A little upgrade of the system - it's not bad!
Attached FilesComment
-
-
When everything is created by your hands, the pleasure is endless!Comment
-
There is no hope for this project to be completed soon, because I decided to change the project to the rear speakers and make them three- way;
PS
In this way i releasing a pair of speakers 18EX..., I will need them for another project. Crazy, madness, just DIY!Comment
-
Happy New Year!
I hope to finish the rear speakers project this year!
Comment
-
It is clear that the project with the rear pillars will not succeed / this year / - I have to make a living from other activities, but while I was sitting, I decided to post this photo:Comment
-
It is my pleasure to present you my logo, thank you for your attention!Attached FilesComment
-
-
Wow. Those are beautiful. Inside and out.Comment
-
Thanks!
The name of the my loudspeakers - "J&N" are the initials of Joro/ my nickname / аnd per se and Nelly/nickname of my wife / and this is ours logo.
Some think, It looks like the J and N are giving each other a high five. Yes, that's right, it's been 40 years together!Comment
-
Congratulations on your 40 years. Its quite an achievement; expecially in our society these days with its commitment issues.Comment
-
Vision with the logo;Comment
-
still considering upgrading...
Comment
-
Beautiful! Your workmanship is very impressive!Comment
-
Even though I made a mistake, I had a great DIY weekend. Let me explain. Saturday, I go out and cash in the gift card I got for Father's Day (I know, I know) for what it was always meant to pay for, a Ryobi table saw. Then later that day I picked up a basic Skil plunge router as well and started building... -
Just finished up a pair of sr71's for my dad, veneered them in santos rosewood and they look as good as they sound. Only martin logans trump them w/ regards to high frequency reproduction. The many build threads on here were an incredible resource when it comes to construction methods...really helped... -
Directivity
Directivity refers to the intentional control of the sound dispersion pattern of a speaker system. It involves shaping the radiation characteristics to achieve specific coverage and performance goals. Directivity control is crucial in applications where precise sound targeting, uniform coverage, and controlled off-axis response are desired. Loudspeakers typically exhibit different directivity patterns depending on their application, which can be broadly categorized into...18 July 2023, 13:12 Tuesday -
Faraday Ring
The Faraday ring, named after the English scientist Michael Faraday, is an electromagnetic component used in loudspeakers and other audio systems. It serves to minimize electromagnetic interference and distortion caused by eddy currents induced in the voice coil and pole piece of a loudspeaker driver. Faraday rings are typically made of conductive materials, such as copper or aluminum, and are placed around the pole piece of a loudspeaker driver.
When an alternating...18 July 2023, 15:45 Tuesday -
Impedance
In loudspeaker design, impedance is a critical electrical characteristic that directly influences how a speaker interacts with amplifiers and affects the overall performance of the audio system. Impedance is a measure of the opposition to the flow of alternating current (AC) in an electrical circuit. It is represented in ohms (Ω) and varies with frequency in speaker systems. Impedance is essential for loudspeaker design because it influences several aspects:- Driver Selection
19 July 2023, 10:19 Wednesday
Comment