Inspiration may come from many sources...
Having discovered the film works of Kurosawa, I feel a kindred spirit in the force of his cinematic work, and inspiration for a new loudspeaker system worthy of being a tribute to his work...
The few imperial agents I still have at my beck and call have been more diligent of late in bringing me the most updated information... new possibilities are on the near horizon, deserving thought and effort such as this arrangement:
While it is not as ruthlessly cost effective as some other single vendor designs I have completed in the past; in this case the goal is to be simply, effective.
Frequency range: 30 Hz to 30 kHz
Driver complement will include 3x ScanSpeak 10W00-00-00 PR
Sensitivity after BSC correction: 90 - 91 dB
Proposed Crossover configuration: Duelund with center frequency of 850Hz, Aleph of 3.0
Footprint: approximately 10-12"W X 18-20" D plus stabilizing legs; height ~ 44-48"
It could be possible to build this in a modular fashion, and that will be considered at length- possibly even for an acoustical prototype.
With the planned sensitivity, this might be a good fit to an 80W Class A design which has been under consideration for some time- though it's likely that the maximum current operating point will need to be increased to accommodate what may be a low impedance in the mid bass, even using 9 ohm RDC drivers.
On the other hand, the recently popular Class D designs should have little difficulty providing stunning SPL's with this system.
Having discovered the film works of Kurosawa, I feel a kindred spirit in the force of his cinematic work, and inspiration for a new loudspeaker system worthy of being a tribute to his work...
The few imperial agents I still have at my beck and call have been more diligent of late in bringing me the most updated information... new possibilities are on the near horizon, deserving thought and effort such as this arrangement:
While it is not as ruthlessly cost effective as some other single vendor designs I have completed in the past; in this case the goal is to be simply, effective.
Frequency range: 30 Hz to 30 kHz
Driver complement will include 3x ScanSpeak 10W00-00-00 PR
Sensitivity after BSC correction: 90 - 91 dB
Proposed Crossover configuration: Duelund with center frequency of 850Hz, Aleph of 3.0
Footprint: approximately 10-12"W X 18-20" D plus stabilizing legs; height ~ 44-48"
It could be possible to build this in a modular fashion, and that will be considered at length- possibly even for an acoustical prototype.
With the planned sensitivity, this might be a good fit to an 80W Class A design which has been under consideration for some time- though it's likely that the maximum current operating point will need to be increased to accommodate what may be a low impedance in the mid bass, even using 9 ohm RDC drivers.
On the other hand, the recently popular Class D designs should have little difficulty providing stunning SPL's with this system.
Comment