Ply is in and it starts. Quick question on port. I'm going to do slot but need to double check if I have to add volume to the cab to compensate for the slot port or if I can stick with the original 1cu/ft design.
Calculated port to equal out the 2" x 9" round port suggested in the build for a tuning of 34Hz is 28.27 cu/in.
Slot port calculation is 7.5" x .75" x 5" netting a volume of 28.125 cu/in.
Calculated port to equal out the 2" x 9" round port suggested in the build for a tuning of 34Hz is 28.27 cu/in.
Slot port calculation is 7.5" x .75" x 5" netting a volume of 28.125 cu/in.
Comment