Does anyone know if you can hook a projector up to these things without any problems?
-
-
The Gateway has both DVI and VGA outputs- while the compatibility issues regarding levels and EDID are sometimes the cause for hair pulling when trying to connect PC oriented gear to CE oriented displays, good ole VGA is pretty straight forward, and doesn't suffer in quality. For a relatively low res projector like a 4805, the VGA connection should work fine. The DVI connection will probably work OK, too.
~Jonthe AudioWorx
Natalie P
M8ta
Modula Neo DCC
Modula MT XE
Modula Xtreme
Isiris
Wavecor Ardent
SMJ
Minerva Monitor
Calliope
Ardent D
In Development...
Isiris Mk II updates- in final test stage!
Obi-Wan
Saint-Saëns Symphonique/AKA SMJ-40
Modula PWB
Calliope CC Supreme
Natalie P Ultra
Natalie P Supreme
Janus BP1 Sub
Resistance is not futile, it is Volts divided by Amperes...
Just ask Mr. Ohm.... -
Thanks Jon....I appreciate your commentsComment
-
hey every1,
i recently built a HTPC with a radeon 9200SE for a vid card. Was banking on my 22" samsung LCD having VGA and DVI inputs but sadly that wasnt the case when i brought it home
Also found out the hard way that you cannot have two High def channels in PIP because of the single...
-
Ha my new monitor is more advanced than my 6 year old square TV. :lol:
Whoa, getta a load at the size of that monitor....that thing is HUGE!
Here's the unoffical thread (after 35 pages and growing):
http://www.hardforum.com/showthread.... -
Has anyone had trouble connecting their PC through their receiver?
Here is my setup
PC with ATI Radeon 9600 Pro video card with DVI and VGA outputs.
Yamaha RX-V1600 with 2 HDMI inputs and 1 HDMI output
Dell 5100MP projector with about one of each type of input imaginable.... -
I have a gateway FPD1500 LCD display that i want to run as a second monitor for my Apple Powerbook via DVI. When i hook it up, all i get is a black screen. I think i found out that the LCD is DVI-D and i assume that my powerbook is DVI-I. Are these two not compatible? Is there ANY way to get the... -
Hai everybody.
I want to ask that is there any possible that a non dvi projector (non HDCP) such as Infocus screenplay 4800 watch movie using dvd player with DVI support? Can I use DVI to Vga Converter?25 January 2005, 03:10 Tuesday
Comment