RAC/XLR Connections

[pcking]

I have a Rotel RMB 1095 Amp , and wanted to know if I could connect both the RCA and XLR Inputs , but not use them at the same time ?
There is no switch on the back to change between the 2 inputs, unlike my Rotel RB 995 which has ,The strange thing is the RMB manual say's there is a switch.

Thanks Paul.

[windshear]

I would not recommend using both inputs as the circuitry is not designed for this and you may end up with ground loop and or impedance issues. The switch that you are referring to, is internal to the RCA inputs. This would only be used if you use the DB25 plug and would then be in conjunction with the set of enclosed open circuit RCA plugs that the amplifier comes with.