hello i have a rotel rsp 1068 and i live in sweden so its fed 220v and 50hz.do you know wich pin the phase should be conected to, seen from the back.Left or right pin 8)
high voltage
Collapse
This topic is closed.
X
X
Related Topics
Collapse
-
by jorgen68Hello i've changed the powercord on my rb985 to a supra lorad cable.I've installed a new power inlet on the amp with a ground pin.should i use it or not.is there any gain(improvement in the sound) in grounding the rb 985.i am currrently running it without grounding since thats how i'ts originally was...-
Channel: Club Rotel
-
-
by dvdchancejust curious why some of the Rotel amps, 1095, have a third ground pin while others, like my 1075, don't?
is the 1095 "safer" because it has the ground pin?-
Channel: Club Rotel
-
-
by JBallI set up my gear last night a fired it up. I bought the 1067 and the 1080 to bi-amp the fronts. I bought the Nautilus 803's. Inital thoughts, they sound much better than in the store. In the store they were actually too bright and wasn't blown away, i think the room was poor too. I bought them...-
Channel: Club Rotel
-
-
by Locutus2kI was thinkin to add a (bridged) RMB-1066 to my 1095 for back surround channels and one more central (processor is 1098). I was wondering if the 1066 has the ground pin in the power chord or not. Can anyone help me?
Thx,
Locutus2k-
Channel: Club Rotel
12 November 2004, 06:20 Friday -
-
by Claude D DHey guys,
I have a ground loop hum in my system when I hook up my multi channel outputs from my DVD player to my Rotel RSP-1066(also if I run a s-video cable from my projo to my 1066)
The projo has the 3 prong plug with the ground.When I temporarily plug the projo into an old... - Loading...
- No more items.

Comment