Rotel 1575

Collapse
This topic is closed.
X
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • jimarchy
    Junior Member
    • Dec 2008
    • 27
    #1

    Rotel 1575

    Plugged in my new amp but not getting anything out of it. The red LED (protection indicator) is On... checked all connectors and everything looks fine.... tried turning it off and pressing the On/Off button to reset it before turning it on but no luck.

    Any ideas?

    James
    Tags: None
      • Bottom
    • Ken49r
      Senior Member
      • Dec 2007
      • 312
      #2
      James,
      Do you have it plugged into the wall socket and not a power conditioner? That is one reason he amp could shut down. Amps need to be plugged directly into the wall.

      What equipment are you using?
        • Bottom

        Comment

        • jimarchy
          Junior Member
          • Dec 2008
          • 27
          #3
          I have it plugged in to a shared power plug... and I have just tried it direct into the wall socket. Still the same.

          I have a Classe SSP600 plugged in to the Rotel 1575 with 2 B&W XT4's and an XTC centre.

          Its the first time I have put it together and plugged it all in (Been buying bits and peices of Audiogon and finally have all I need)...checked all the connectors and everything looks to be connected properly.
            • Bottom

            Comment

            • mjb
              Super Senior Member
              • Mar 2005
              • 1485
              #4
              Make sure the small back panel "remote" switch is off.
              The 1575 is different to the 10 series amps, the red protection light also means "stand-by", ie, NOT remote triggered on.
              - Mike

              Main System:
              B&W 802D, HTM2D, SCMS
              Classé SSP-800, CA-2200, CA-5100
                • Bottom

                Comment

                • jimarchy
                  Junior Member
                  • Dec 2008
                  • 27
                  #5
                  ;x( thanks!! I turned the switch off, the red light went out and there was music :T

                  Thanks for your help guys!
                    • Bottom

                    Comment

                    Previous template Next

                    Related Topics

                    Collapse
                    • RichardB
                      Rotel 1570/1575 12v trigger problem
                      by RichardB
                      Hi,

                      I have recently picked up a Rotel 1570/1575, and I am having a few problems with the 12v trigger between the 1570/1575. I am unable to get the 1575 to power on while using the trigger when turning the 1570 on. I have the trigger cable connected to trigger out 1 on the 1570, and the...
                      22 July 2010, 08:19 Thursday
                    • Eliav
                      Are your amps. plugged in directly to the wall Vs power conditioner ?
                      by Eliav
                      Hi All

                      Has any of you experienced any audible diffierences ( particularly in lower frequencies reproduction) , when powering your amps through your power conditioner Vs the walls outlets ?

                      My experience with Classe CAM 600 monoblocks is that Bass reproduction is slightly...
                      13 May 2012, 13:28 Sunday
                    • srinathalapati
                      Power question for RSX-1055
                      by srinathalapati
                      Folks,

                      First, I am so glad we have this forum here! Thanks everyone for making this happen.

                      Now to my questions:

                      1) Is it recommended to plug amplifiers (mine is specifically a RSX-1055) into a:
                      a) wall
                      b) surge protector
                      c) power conditioner...
                      13 February 2007, 07:40 Tuesday
                    • Race Car Driver
                      ground loop noise? its bad
                      by Race Car Driver
                      So I finally called comcast and got the HDcable package.
                      With the new "cable box" connected im getting a quite loud hiss through my amps. I will try and be as brief to the point as I can.

                      Two bryston amps plugged into the wall for the mains

                      Monster power...
                      28 June 2007, 16:50 Thursday
                    • manjo
                      Question about Rotel 1575 & more
                      by manjo
                      Hi all,

                      Just joined this forum. Have a few questions.

                      1st question:
                      I am considering a Rotel 1575, and PSB Image T65 speakers and SV12 plus sub-woofer. The question is does the 1575 have provision for a subwoofer ? The spec says 5x250W receiver, but I thought if...
                      30 June 2009, 14:12 Tuesday
                    • Loading...
                    • No more items.
                    Working...
                      Searching...Please wait.
                      An unexpected error was returned: 'Your submission could not be processed because you have logged in since the previous page was loaded.

                      Please push the back button and reload the previous window.'
                      An unexpected error was returned: 'Your submission could not be processed because the token has expired.

                      Please push the back button and reload the previous window.'
                      An internal error has occurred and the module cannot be displayed.
                      There are no results that meet this criteria.
                      Search Result for "|||"