Hi! Just wanted to get some opinions on the above mentioned amps. They are both 250wpc but one is 2 channel the other is 5 channel. If you drive the same speakers with either one which combo would you think is better? And why.
-
-
They very probably (though I'm not 100% sure) use the same ICE modules internally, so there will be no difference. Even if they don't use exactly the same modules, the difference will be very small. So, if you need 5 channels, buy the 5 channel version - otherwise....- Mike
Main System:
B&W 802D, HTM2D, SCMS
Classé SSP-800, CA-2200, CA-5100
-
Hi there,
I currently have a Sony 5300 es amplifier with b&w 683's for fronts, htm61 for center and 602 s3 for rears. I use the front and SB channels to drive the fronts in the so called sony bi-amp config. The 683's are a bit too hungry for my amplifier and im consudering buying... -
Hi! Just wanted to get some opinions on the above mentioned amps. They are both 250wpc but one is 2 channel the other is 5 channel. If you drive the same speakers with either one which combo would you think is better? And why. -
Can anyone tell me please what the power output is of these amplifiers after 4ohm?
I understand they are 250w into 8ohm, 500w into 4 ohm...............?
My speakers dip down to 3.6ohm, and im curious as to whether my 1575 is sufficient for them.....it certainly sounds good?... -
I've struggled to find any reviews on the 1565 apart from one useful user review on here
I've read that the 1565 uses the ICEPower 200 modules - and although specs wise they don't look far off the ICE Power 250 modules (that the 1575 and 1077 use ?) - pictorially and lay-out wise the...30 January 2010, 03:27 Saturday -
I'm thinking about replacing my RB-1092/1091 combo (driving 802d's) with a RMB-1575 - replacing three boxes with one, and with only 3db less output. Added to which, it will nicely match the yet to arrive RSP-1570 (WAF). This a good or bad idea? I'm also wondering what ICE modules they're using in the...
Comment