Hi, could someone tell me how hard it would be to relace the speaker connectors from the old black and red ones to the new clear ones on the rb1090. I have heard they are a superior connector. Anyone know why?
Thanks.
Thanks.
-
-
Sonically they are probably not worth the effort. -
IMHO changing the speakers connectors is something "to do" at the really end of the system/room performance tunning, "just for fun"
It's not that hard, it just take time and must be done carefully not to damage anything.
If you change them, go for ultra high end binding posts, full copper, or even silver.
Also change the Am RCA, and change them too on speakers, pre-amp and source, just changing them at the amp output is for me useless.
Something easy and good to do time to time is to clean the contacts with alcohol, that help to keep them clean.Comment
-
Hello I did that on my Yamaha NS-1000. I put some PureSonic conectors. It is much easy to connect big cables... If you have the time, do it !Jean-Pierre Imbeau
ROTEL: RSP-1098|RT-1080|RCD-1072|RDV-1060|RLC-1040|RB-1080x2|RMB-1075
PIONEER: ELITE PRO-940HD|BDP-HD1|inno
YAMAHA: NS-1000|NS-1000M|CA-1010|CT-1000|TC-1000|YP-1000
PEARLESS: XXLS-12x4|BEHRINGER DSP-1124Comment
-
I'm looking to buy an lcd widescreen tv for under $1000, preferably with 720p display capability.
I noticed that changing channels at the Best Buy (the ones out on the shelves that appear to only be connected to coax cables [is is still digital feed]...not the component connected ones... -
I am going to buy an rmb-1075 with an rsp-1068 next week. I hear about new processors and how people are waiting untill they come out. I want to know what will change. If the only change is going to be the HDMI, and not a change in surround mode (DD, DTS or something new) then I will buy it. Or... -
It’s my first post in the Classé forum since I don’t own one, but my questions regards one !!
so here it is...
I currently own these equipments:
- Rotel RA-972 integrated 60w/ch
- Rotel RCD-991 CD player
- B&W DM603 S3 speakers... -
I had no chance in the Classé Forum, so maybe you guys have a answer...?
Thanks
-------------------------------------------------------------------
It’s my first post in the Classé forum since I don’t own one, but my questions regards one !!
... -
I'm expecting replacment VC's for SEAS H1212 tweeters and was wondering if there are any tips that you all can give me. I ask because I ran into this during a search:
""In case you ever need to replace the voice coil assembly of your tweeter, here is the procedure for re-assembly:...
Comment