Could someone tell me what the current software revision for the RSP-1066 is? I've read that it's v1.37, but am really curious if the upgrade file name for 1.37 is similar to 1.35 ( e.g. X1066v137_xxxxx )
TIA
mike
TIA
mike
-
-
1.37 is the current version but I haven't got a definative answer as to what improvements they made in 1.37 over 1.35.
-
Andrew,
Thanks for the reply. It's interesting; the first software revision I received (v1.35) was named x1066v135_20020419EX.bin. The one I just received from Rotel today was named x1066v140_20020611.bin. By the name of file, it would seem an as yet unannounced v1.40...? I didn't receive any documentation with the file, so I can't comment on what has changed.
Regardless, kudos to Rotel both for continuing to refine their products and for their responsiveness to their customers!
mike
Originally posted by Andrew PrattComment
-
can you please send me the 140 version?
Comment
-
I emailed Rotel and asked what was new about 1.40. Here is the reply I received from Mike Sheehan...
Also, I would caution about emailing updates around. I believe Rotel has the "request-receive" process in place because they must report those machines being updated to DD-EX to Dolby as part of their licensing agreement. If someone has already requested an update from Rotel then there is probably no harm in sending them the newer update. But, if someone has not ever contacted Rotel for an update it is probably best to have them touch base with Rotel at least once so that their name/unit is accounted for.The only change from previous versions on this is slightly improved surround steering information for 6.1/7.1 systems
GreggComment
-
Good point re requesting the updates from Rotel and welcome to the HT Guide Gregg glad you could join us. I would love to make this forum the one place people can come to for 1066 info so if you have anything to share please feel free to help us realize that goal
Comment
-
topDoug
"I'm out there Jerry, and I'm loving every minute of it!" - KramerComment
-
Hi,
Just got a RSP-1068 to replace the Outlaw 950 I was using and I am very happy with it! Nice to join you Rotel folks...
Question: The new 1068 has software revision 1.14 and the current rev seems to be 1.17. Since the 1.17 update appeared to be available in February,... -
How do you know what software revision a HTS 7.1 is?
How does one upgrade the software. Can a user do it or does it have to go back to the factory?
As allways, Thanks!03 February 2007, 11:16 Saturday -
Guess what Rotel sent me this morning!
Note that the HD units indicates the newer models running the modified chipsets. If your machine is using these different chipsets please do not flash your firmware unless you've obtained the correct file directly from Rotel.
RSP 1066 Software... -
The CP-800 is going to be getting an all new digital input board to replace the existing one. Originally Classé was planning to release an upgradeable daughter card to support Airplay over WiFi and Ethernet. This is no longer the case. The new board will still support Airplay over Ethernet but it will... -
28 Feb 2005
Parasound has released a long-awaited massive update for the Parasound Halo C1 and C2 controllers. I'll dedicate this thread to information and discussion about this update.
NOTE: This is the first official software update that Parasound has released for...
Comment