RSX-1056+1080p

Collapse
This topic is closed.
X
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • phuz
    Member
    • Jan 2003
    • 57
    #1

    RSX-1056+1080p

    I've searched and searched, and haven't found a whole lot of info. From what I understand the receiver can't pass 1080p to a display. Is there any way to fix this? Is there a firmware update that can be done, or is one planned?

    Thanks.
    ==============
    -phuz
    Tags: None
      • Bottom
    • Kevin D
      Ultra Senior Member
      • Oct 2002
      • 4601
      #2
      Do you mean the 1057? The 1056 doesn't have HDMI. I'm not aware of anything that outputs 1080p over component.

      Kevin D.
        • Bottom

        Comment

        • phuz
          Member
          • Jan 2003
          • 57
          #3
          Originally posted by Kevin D
          Do you mean the 1057? The 1056 doesn't have HDMI. I'm not aware of anything that outputs 1080p over component.

          Kevin D.
          No, I mean 1056. I could be wrong, but I think HDMI isn't required for 1080p. My PS3 outputs 1080p via it's component output.
          ==============
          -phuz
            • Bottom

            Comment

            • renpar61
              Junior Member
              • Jul 2007
              • 19
              #4
              the XBox 360 also outputs 1080p via component. Never tested because my display is 1080i. I have the 1057 w/HDMI which doesn't support 1080p either. The upcoming 1058 should do that, and also have a built-in scaler. In any case, even if your display accepts 1080p, a lot of people say there is no difference between the 2 (for now).
                • Bottom

                Comment

                • Pez
                  Senior Member
                  • May 2004
                  • 472
                  #5
                  Even though the PS3 and Xbox can technically output 1080p over component I dont think it actually can because of the copyright issues.
                    • Bottom

                    Comment

                    • Kevin D
                      Ultra Senior Member
                      • Oct 2002
                      • 4601
                      #6
                      The 1056 should be able to pass the 1080p component signal, not sure if you will get any softening of the picture or not but you will probably not notice.

                      Kevin D.
                        • Bottom

                        Comment

                        Previous template Next

                        Related Topics

                        Collapse
                        • shadow
                          Component Video Pass Through Capability?
                          by shadow
                          I have a 1056 receiver and a Comcast HD cable box. My question is: I frequently watch cable tv through the tv with tv sound w/o the Rotel sound system engaged. I currently am running my cable box directly to the tv. If I run a component cable from the cable box to the 1056, then component out from...
                          13 March 2005, 11:52 Sunday
                        • Vicente
                          Conect a monitor to RSX 1056
                          by Vicente
                          Hi everybody!

                          I have a spare LCD PC monitor with only a VGA input, and I was thinking of using it as a display for the RSX 1056/RDV 1060 combo as I have it conected to a projector.

                          This way I won't need to turn on the projector every time I need to change the setup, see...
                          23 November 2006, 04:44 Thursday
                        • Bob Knarly
                          1056 2 channel ?
                          by Bob Knarly
                          I am hoping someone here can help.The 1056 outputs a signal to all speakers,even when only 2ch mode is selected.One would think in 2ch mode the center and surrounds would be muted,but you can still hear channel noise.Any reply appreciated.
                          04 April 2004, 15:38 Sunday
                        • stantheman2
                          RSX-1056 - A review
                          by stantheman2
                          As promised, here is a more detailed review of my RSX-1056. I've had it over two weeks, and have spent most of my free time listening to music and watching DVDS using the 1056. That's perhaps testimony enough to the overall sonic quality of the 1056 - I'd rather listen through it than spend my free...
                          18 May 2004, 22:24 Tuesday
                        • fvoelling
                          RSX-1056: 7.1 analog input for Blu-Ray
                          by fvoelling
                          Hi,

                          I've been running a 1056 with a 7.1 speaker setup for a couple of years now, and started watching Blu-Ray movies from a PS3 80GB model last year. The PS3 is connected to the 1056 with digital coax and component.

                          Since my current setup is limited to 5.1 and 6.1, both...
                          07 December 2009, 23:39 Monday
                        • Loading...
                        • No more items.
                        Working...
                          Searching...Please wait.
                          An unexpected error was returned: 'Your submission could not be processed because you have logged in since the previous page was loaded.

                          Please push the back button and reload the previous window.'
                          An unexpected error was returned: 'Your submission could not be processed because the token has expired.

                          Please push the back button and reload the previous window.'
                          An internal error has occurred and the module cannot be displayed.
                          There are no results that meet this criteria.
                          Search Result for "|||"