Output signal on RDV-1092 with DVD-audio

[skippy]

Hi,

I owned a RDV-1092 and I want to play a DVD-audio ( 2 ch 24/192) disc. is the output on the L and R via the stereo output connectors the same as the the output L and R via the 5.1 output connector.

Thanks,
Gert-Jan

[Blindamood]

It might depend on the player (I don't have the 1092), but usually the separate 2-channel connection is a 'down-mixed' option, for connecting to a 2-channel pre-pre. I would just go with the L/R of the 5.1 outputs for DVD-A.

[Vicente]

I own the rdv 1060 and RSX 1056, and if I use a 2 channel DVD_A, in the bypass mode I don't find any differences between the two connexions (two loudspeakers only).

You might find differences:

If using a subwoofer, it won't work in the stereo bypass mode but it will in the ext output (5.1)

If you select the stereo (without bypass) you are using the DAC's from the receiver. If you choose EXT the DAC's used are from the 1092. (I agree with Blindamood, I prefer the second option too).

Regards