Bi-Amp Rotel RSX-1055 and RB-1070 ?

Collapse
This topic is closed.
X
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • KhanhLi
    Junior Member
    • Feb 2004
    • 3
    #1

    Bi-Amp Rotel RSX-1055 and RB-1070 ?

    Hi all,
    I am recently a proud owner of aforementioned Rotel gears. I'm actually very happy with this configuration using RB-1070 to drive my front speakers and internal amps of RSX-1055 center and rear speakers. Since I've met Club Rotel I've come into the great idea (often mentioned hier) to bi-amp my main speakers which are capable for bi-amping.
    So I think, the RB-1070 will drive the bass-chassis of Canton Ergo RC Loudspeakers and the integrated power amps of RSX-1055 will drive the middle and highfrequency chasiss.
    My question is, have anybody experience with bi-amping in this config. (RSX-1055 with RB-1070) ?
    Is there any noticeable sonic improvement if u bi-amp your speakers on that way ?

    Thanks a lot for any opinions!

    Khanh Li
    Tags: None
      • Bottom
    • Greg K
      Member
      • Jul 2003
      • 34
      #2
      I am thinking about doing it on my 1055 and 1070 today .If I get around to it ,I will post results

      Greg
        • Bottom

        Comment

        • KhanhLi
          Junior Member
          • Feb 2004
          • 3
          #3
          Thank you Greg, I'm really interested in how it is sounding after bi-amping. The only doubt I have is using different kind of amps to drive one speaker. That might cause problems if the rsx-1055 internal amp and the rb-1070 have different efficiecy factor.
          Let your ears say "That makes sense or not".

          Khanh Li
            • Bottom

            Comment

            Previous template Next

            Related Topics

            Collapse
            • Belgarath
              RB1050 or RB1070 for 7.1 system
              by Belgarath
              Hello everybody, I am new to this forum.
              I would appreciate you thoughts on the following:

              My 5.1 setup consists of:
              Sony STR-VA555ES Receiver (6x100W)
              B&W DM603 S3 Fronts
              B&W DM601 S3 Surrounds
              B&W LCR60 Center
              B&W ASW650 Sub...
              08 January 2003, 12:37 Wednesday
            • mtlrx
              Biamping the HTM2D?
              by mtlrx
              Hi everyone, first post. I am wondering if it's worth biamping the HTM2d. I will be getting 802d and want to biamp them with Bryston 6b(3 channel) 300w/channel amps but wondering if it's worth biamping the HTM2D. If I do biamp the HTM2D I will get another 6b or should I just get a 4b(2 channel) also...
              31 May 2006, 21:10 Wednesday
            • youngjun91
              RSX 1056 biamp config with NHT 2.5i question
              by youngjun91
              Hi, new 1056 owner here. Got a question for you all. My 86db speakers are not real easy to drive, although so far in my room, they sound very good with the 1056. I was thinking of buying a couple of subwoofer amps specifically made to drive the subwoofer section of my NHT 2.5's, namely the NHT SA-2...
              20 September 2005, 12:17 Tuesday
            • adinfinitum
              RSX1055 + RB1070 (now + RC1070) - Solved
              by adinfinitum
              Hello all,

              Have been lurking through various HT forums for some time but new to Club Rotel. I have learnt much and have improved my system greatly with the advice I've learnt. However, I am looking to upgrade within a limited budget, and a limited physical space and wish some advice....
              29 April 2006, 03:54 Saturday
            • specialized
              RB-1080 BiAmping with 800 Series
              by specialized
              Last week i got another RB-1080 (stock is almost gone so i wanted to have another one which i'll use maybe for rears, maybe for center, maybe for next room, maybe to try biamping, so i thinked that definitly is not a waste).

              I tried to biamp my speakers using Van Den Hull Cables CS-122....
              30 November 2009, 03:21 Monday
            • Loading...
            • No more items.
            Working...
              Searching...Please wait.
              An unexpected error was returned: 'Your submission could not be processed because you have logged in since the previous page was loaded.

              Please push the back button and reload the previous window.'
              An unexpected error was returned: 'Your submission could not be processed because the token has expired.

              Please push the back button and reload the previous window.'
              An internal error has occurred and the module cannot be displayed.
              There are no results that meet this criteria.
              Search Result for "|||"