RSP-1066 Noise & Buzz

Collapse
This topic is closed.
X
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • Srv
    Junior Member
    • Sep 2003
    • 3
    #1

    RSP-1066 Noise & Buzz

    Hi! My new RSP-1066 produce a heavy noise/buzz in rear channels when the Processor is in use. The noise follow the volume and when volume is set in zero, its no noise or buzz. When I'm playing in analog mode, as in SACD 5.1, DVD-Audio 5.1, 2.0 & in ordinary Stereo mode there is no noise what so ever. Ive alreaddy´exclude all sources, (diff cables, amp, cords etc.) and the noise even appear when the RSP-1066 is connected with one amp to the speakers, (without any other equipment). Now i play with my old preamp and use the same equipment and it works just fine. So it must be the Processor who is produce the heavy nosie, what to do?
    Its really heavy, it isnt any humming, or low nosie, u can hear it as a radio who havent find any station, loud! Hope u can help me, Rotel Guru's.
    Thanks, Srv n sorry 4 my poor English :? .




    Sorry about my poor english, still Rockin´anyway, Regards, SRV
    Sorry about my poor english, still Rockin´anyway, Regards, SRV
    Tags: None
      • Bottom
    • Andrew Pratt
      Ultra Senior Member
      • Aug 2000
      • 16478
      #2
      Hmm that's odd. have you tried unplugging it for a while? If its a brand new one maybe exchance it at your dealer and see if the new one does the same thing.




        • Bottom

        Comment

        • Srv
          Junior Member
          • Sep 2003
          • 3
          #3
          Yeah, I've tried that to. I even had tried to take current from my Garage with a 200 feet cord :x , to se if the RSP was sensitive with other electric equipment. I've also tried to put off all other sources in my house. It still the same.
          /srv




          Sorry about my poor english, still Rockin´anyway, Regards, SRV
          Sorry about my poor english, still Rockin´anyway, Regards, SRV
            • Bottom

            Comment

            Previous template Next

            Related Topics

            Collapse
            • neverwouldof
              Small Buzz still audible in speaker.... JC1's ?
              by neverwouldof
              Is it possible that JC1's are producing a small amout of buzz/hiss in speakers when volume is all the way down? I have everything hooked up to HTPS 7000 sig. series conditioner. But still getting a slight amount of noise. Buzz not audible at 5 feet. Is it normal to always have some noise in speakers...
              13 December 2005, 14:57 Tuesday
            • Lexman
              Introducing Buzz Goddard on TAG McLaren audio
              by Lexman
              Guys, please give a warm and rousing welcome to Buzz Goddard. Buzz is currently President of Tag Mclaren Audio America. Let's hope he didn't have to go through what George W. did to get to the office, lol.

              Welcome to htguide Buzz! (That is when you get here). For those that don't know...
              14 December 2000, 11:50 Thursday
            • jjahshik32
              Slight buzz noise on 805s tweeters while idle
              by jjahshik32
              When the speakers are just on without any sound both tweeters I hear a slight buzz noise when I put my ear next to them... but the new htm4's tweeter doesnt have this sound.. what could cause this to happen??

              Update: just found out that it only makes that slight buzz noise when the main...
              26 February 2008, 23:08 Tuesday
            • See-Fu
              RSX 1057 buzz, HELP.
              by See-Fu
              My equipment consisted fo the follow before I added an amp.

              RSX 1057, TV, Xbox 360 & DVD player. SPeakers were B&W 603 and a LCR600.

              WHen I had this setup everything worked out fine, no buzzing. However once I added a Krell amp, I started to notice a buzzing noise...
              09 December 2006, 16:58 Saturday
            • ht_addict
              OH the dredded buzz is haunting my setup.**SOLVED THE MYSTERY**
              by ht_addict
              My old setup:

              Paradigm Mini Monitors
              Paradigm CC-350
              Paradigm PS-1000
              Rotel RMB-1066

              New Setup:

              Paradigm Studio 40v3
              Paradigm Studio 20v3
              Paradigm Studio CC470
              Paradigm PW-2100
              Rotel RMB-1095

              ...
              08 October 2003, 07:27 Wednesday
            • Loading...
            • No more items.
            Working...
              Searching...Please wait.
              An unexpected error was returned: 'Your submission could not be processed because you have logged in since the previous page was loaded.

              Please push the back button and reload the previous window.'
              An unexpected error was returned: 'Your submission could not be processed because the token has expired.

              Please push the back button and reload the previous window.'
              An internal error has occurred and the module cannot be displayed.
              There are no results that meet this criteria.
              Search Result for "|||"