1067 - zone 2 problem

[lars]

Hello All,

Trying to get zone 2 working. Analogue in as CD, redirected from center backs towards Large2 configured speakers.

Unfortunately, all I get is a hum from the chassis of the 1067, nothing at all from the speakers -

Any thoughts, suggestions or comments are most welcome -

Thanks in advance,
Lars

[lars]

Actually, is anyone using the zone 2 functionality on a 1067?

Thanks,
Lars

[lars]

Okay, playing with this a bit more I find that the 1067 just will not accept the redirect. When I select it in the Default menu, and change it...then exit the menu, then return to the default menu the forward setting remains always at 'No'

Can't change the tuner region setting either, though I don't need to at this time.

- Lars

[Kevin D]

I believe after setting those settings you need to perform a factory reset for it take effect.

Kevin D.

[lars]

Hello Keven, and thank you for your post -

I have tried a factory reset to no avail; I've also re-installed the upgrade, also to no effect unfortunately.

It would be good to know if anyone else is running 1.2.2 and seeing the same problems, as I suspect that this is software related -

Thanks,
Lars

[Kevin D]

Are you sure you did the factory reset immediately after selecting the redirect feature?

Kevin D.

[lars]

Thanks Kevin,

A bit non-intuitive that, but it works - and thanks very much for your help!

Lars