Problems updating firware on rsp 1066

[losdaddy]

anybody had any problems updating firmware w/Windows 2000. I'm done it before w/win 98 and it went smoothly.

with win 2k, when i power on the rsp 1066 nothing happens on the hyperterminal window. with win 98 i remember the text automatically came up that asked me if i wanted to clear memory. Do I need to do something different w/win 2k.

thanks in advance.

carlos

[Matt Sprouls]

Sorry if you have already checked but..

Did you make sure your terminal settings are correct?
Did you make sure that both DIP's are in the correct position? Down if I remember right.

Regards,
Matt

[losdaddy]

Yep, double checked all terminal settings and DIPs.
First time i tried i forgot to push down the DIPS and something came up on the terminal screen. Looked like a readout of the LED on the RSP.
I cleared everything, started from scratch, this time w/DIPs down, and
nothing. I'm stumped.

[Andrew Pratt]

Check and tripple check all your settings are correct but you might also just have to wait a while...it takes about 4 minutes or so in Windows 98 but in any NT based OS (NT,2000 or XP) it takes as long as 30 minutes

[zeppelin]

It took me about 1 hour under WinXP to upgarde the firmware.
losdaddy I think you should check your cable or your pc com port cause it might be a faulty cable or a faulty com port and double check your HyperTerminal setting.