A51 VS Gemstone

Collapse
This topic is closed.
X
X
 
  • Time
  • Show
Clear All
new posts
  • vivid
    Junior Member
    • Dec 2004
    • 3

    #1

    A51 VS Gemstone

    Has anyone heard both of these amps and could you give me your impressions on them?

    What I have gathered so far is that they are both excellent amps with a slightly forward leaning neutral sound. The main difference it that the A51 is 5x250 and the Gemstone is 7X200. I am leaning towards the Gemstone purely because of the 7 channels which eliminates the need for a second amp in a 7.1 HT set up.

    I am trying to match the amp with a set of Wharfedale Opus 3s

    Also how hot (temperature not sound) does the A51 run, does it need a lot of breathing room?
  • Peter Nielsen
    Super Senior Member
    • Sep 2004
    • 1188

    #2
    Originally posted by vivid
    Also how hot (temperature not sound) does the A51 run, does it need a lot of breathing room?
    6" on the top, 3" on the sides and on the back.

    If your rack is of the type that has all sides completely open, 3" top clearance will be fine.

    Peter

    Comment

    • nicholtl
      Senior Member
      • Aug 2003
      • 539

      #3
      From my experience, Gemstone is most commonly referred to in the same sentence as Bryston. Lots of supporters on either side. I don't know how the Gemstone's sound, but if they are anything like Bryston, they would be excellent. That is, only until you try a Halo. Then your mind will be made.

      Comment

      Related Topics

      Collapse

      • vivid
        Narrowing down my amp choices
        by vivid
        I am still trying to figure out which way to go with amps for my Wharfedale Opus 3s. I think I have narrowed it down a bit. Sunfire & Aragon are out, they are a little too warm. Sherbourn OK for the price but for a little more $ you get a lot better quality. NAD great for the price but I would...
        07 December 2004, 09:50 Tuesday
      • jeweltone2002
        A51 transformer hum...Need power conditioner?
        by jeweltone2002
        Hi,

        I recently purchased the A51, and I am getting a hum from the transformer. The hum comes directly from the A51 unit and not through the speaker (it's not a ground loop problem). I send the A51 back to Parasound for repair and they replaced the transformer (very good technical support...
        04 November 2004, 00:06 Thursday
      • john4618
        Parasound C2 with the A52 or A51 or 1205A ???
        by john4618
        I'm getting a Parasound C2 and want to know which amp to use, the A51 at 250 watts RMS x 5 –or- the A52 at 125 watts RMS x 5 –or- should I just use my 1205A that I already have ???

        I can't demo these so I have some questions:

        1. I’m told that my 1205A is a little...
        23 March 2004, 21:28 Tuesday
      • netarc
        Soft (and loud!) hiss from your speakers with C1/A51?
        by netarc
        I'm trying to troubleshoot a *hiiisss* emanating from the speakers when the C1 and A51 are connected and powered up. At a steady state (no inputs playing), the hiss is actually quite loud ... one can hear it from all 5x speakers quite clearly, even from a distance of 10'!

        Tried toggling...
        13 May 2005, 15:47 Friday
      • mikepinkerton
        Lexicon LX-5/CX-5 v A51?
        by mikepinkerton
        I'm curious if people have had much experience comparing the A51 to either of the Lexicons above. The CX seems more closely matched in price, but obviously the LX is the benchmark. I know i'm posting in the parasound forum, and I want a little bit of bias, but you all seem rather level-headed, so I...
        07 June 2004, 13:48 Monday
      • Loading...
      • No more items.
      Working...
        Searching...Please wait.
        An unexpected error was returned: 'Your submission could not be processed because you have logged in since the previous page was loaded.

        Please push the back button and reload the previous window.'
        An unexpected error was returned: 'Your submission could not be processed because the token has expired.

        Please push the back button and reload the previous window.'
        An internal error has occurred and the module cannot be displayed.
        There are no results that meet this criteria.
        Search Result for "|||"