800 Diamond plinth size vs actual speaker size

[Rod#S]

I was wondering how much larger is the plinth of the 800 Diamonds then the actual speaker, sides, front and back? The website only gives a single set of dimensions so I'm assuming those are for the speaker itself, not including the plinth.

Thanks

[Kal Rubinson]

??? The plinth is 15.75" wide by 25.5" deep.

Edit: I measured 17.75 x 25.5, same as factory spec but sloppier. :W

[Rod#S]

Thanks Kal, that's what I wanted to know, I guess I worded it poorly. So that's interesting, the website has the speakers at 17.7" wide and 25.4" deep so the plinth is basically the same length/depth but slightly narrower. Interesting, looking at pictures the plinth always looked to be both wider and deeper than the speaker to me.

[Skyblue]

It is wider and deeper, but not much... Its not as pretty as the 802, but sounds better

[windshear]

Try this.

http://www.bwgroup-support.com/bwcurrentmanuals.html

Go to 800D2 Series and use the PDF drawing, it has all the dimensions.

[Kal Rubinson]

Thanks Kal, that's what I wanted to know, I guess I worded it poorly. So that's interesting, the website has the speakers at 17.7" wide and 25.4" deep so the plinth is basically the same length/depth but slightly narrower. Interesting, looking at pictures the plinth always looked to be both wider and deeper than the speaker to me.

Those are the same but my measurement was casual and less precise. The actual speaker enclosure is somewhat smaller.

[ninja12]

Try this.

http://www.bwgroup-support.com/bwcurrentmanuals.html

Go to 800D2 Series and use the PDF drawing, it has all the dimensions.

Good info to have. Thanks for the link. :T

[Rod#S]

It is wider and deeper, but not much... Its not as pretty as the 802, but sounds better

:rofl:

[Rod#S]

Try this.

http://www.bwgroup-support.com/bwcurrentmanuals.html

Go to 800D2 Series and use the PDF drawing, it has all the dimensions.

Cool, thanks