Anyone have experienced this couplement? (It would be a great bargain....!).
Hi
Hi
-
-
Which NAD? I heard a NAD S300 with 802D and found them to go well together although the amp could use more power. Compared with a Classe CA3200 I felt that the Classé had more grunt and control at low frequencies.
Mav -
I was thinking of c270 power Amplifier: but you're confirming what people said about 'dull' lows. Did you hear ROtel 1080, remaining in a budget frame?Originally posted by Maverick71
HiComment
-
"more grunt"???Comment
-
I have the 802Ds and drive them with a Krell FPB-300cx, I still do have in my posession a RB-1080.Originally posted by melantone
I used this amp to drive a pair of N804s a few years ago, but I moved to the Krell as part of my upgrade plan.
I could not imagine that the RB-1080 would do justice to the 802Ds.
But I can test it for you if you are really interested!
Cheers,
KeithComment
-
Very kind of you, i'd appreciate it very much. :POriginally posted by KEF
I'll wait impatiencely.
Thanks, bye.Comment
-
Hi melantone,
I'm an RB-1080 owner. I also dream about owning 802D speakers one day.
I wouldn't think about powering 802D speakers with an RB-1080, not because it's a Rotel, but because it's not powerful enough to drive the 802D at high volume without distortion.
However I would consider powering 802D speakers with an RB-1090 or an RB-1092.
Nigel.Comment
-
Not the best choice of word, I agreeOriginally posted by Grasynoll
. Should read "weight" 
.
MavComment
-
Now I'm powering 802d with an Accuphase e303, and peak meters don't go further 20-30 watts (40-60 on 4 ohms). So I think it is not a 'pressure' problemsolving, but a bass tightness and definition on high levels on orchestral pienos.Originally posted by bigburner
So Rotel would be sufficient: it is a timbric and definition matter (tightness and power being satisfied).Comment
-
Originally posted by melantone
I should be able to play with it next weekend, I'll post the results for you after I do it, and perhaps a few pics.
Regards,
KeithComment
-
Thanks. I'm waiting.Originally posted by KEF
ByeComment
-
???? ;x(Originally posted by KEFComment
-
Hi all,
I have a pair of B&W CM10's running off a Nad C370 pre/power amp & a Nad C270 power amp both bridged rated 300Wrms each. The power amp section on both units is identical, the C370 just adds a pre amp.
My room is 32ft by 15ft.
I am pleased... -
Hi,
After purchasing my 802D's a few months ago, I'm starting to do some testing with power amps since I realize my TAG 100x5R can't really cope with the speakers demands.
Last Friday I brought home a pair of Nuforce Ref9 monoblocs and a Classé CA3200. I intend to buy... -
I have a NAD T751, C270, and T512 DVD. Just bought a SONY WX 700 sub (I know, but I got it reallly cheap) but I can't get any sound out of it in DTS mode. OK in DD, stereo etc. Any ideas? 8O -
I've always believed that room acoustics is the main contributor to the overall sonic experience one has over its audio room.
After a few experiences with my setup in my room (where I basically tested and measured my speakers at any place available) and a listening session a few days... -
I'm in the process of investing in a home theater/music entertainment room. The room is fairly large, some 30x40 feet. I have already purchased the NAD Master Series M15 7 channel amp and M25 pre-pro. I am now considering what front speakers to buy and I'm thinking about B&W 802D's or 803D's. I...
Comment