hi guy's,
I was hoping if anybody here had a chance of using the H/K integrated amps with the 600 series. I got a good deal with this integrated/amp (brand new) and was planning of mating it with my 602's? Any comments or feedback would be greatly appreciated. Im planning of buying it today. Is it at par with the 600's sonically?
Its rated as follows:
Continuous Average Power Per Channel (FTC) 8 Ohms: 80 Watts@<0.09%THD
20 Hz – 20 kHz, both channels driven 4 Ohms: 120 Watts@<0.3%THD
Dynamic Power (IHF, 1 kHz Tone Burst)
8 Ohms: 115 Watts
4 Ohms: 200 Watts
2 Ohms: 310 Watts
High instantaneous current capability (HCC) ±75 Amps
Power Bandwidth @ Half-Rated output, 8<10 Hz - 150 kHz
Frequency response @ 1W (+0/-3dB) 5 Hz - 150 kHz
Damping factor (20Hz-20k Hz) >125
Signal-to-noise Ratio (Reference rated power output, A-WTD) Tuner/CD 95 dB
Phono (MM): 75 dB
Input sensitivity/Impedance Tuner/CD 270mV/43k Ohms
Phono (MM): 4.0mV/47k Ohms
Overload: Tuner/CD 6V
Phono (MM): 110 mV
Tone control range, Bass @ 50 Hz/Treble @ 10 kHz ±10 dB/±10 dB
Power supply: AC 230V, 50/60 Hz
Power consumption: 345 W
Dimensions (Width X Height X Depth): 439 X 110 X 395 mm
Weight: 10.35 kg
Thanks.
I was hoping if anybody here had a chance of using the H/K integrated amps with the 600 series. I got a good deal with this integrated/amp (brand new) and was planning of mating it with my 602's? Any comments or feedback would be greatly appreciated. Im planning of buying it today. Is it at par with the 600's sonically?
Its rated as follows:
Continuous Average Power Per Channel (FTC) 8 Ohms: 80 Watts@<0.09%THD
20 Hz – 20 kHz, both channels driven 4 Ohms: 120 Watts@<0.3%THD
Dynamic Power (IHF, 1 kHz Tone Burst)
8 Ohms: 115 Watts
4 Ohms: 200 Watts
2 Ohms: 310 Watts
High instantaneous current capability (HCC) ±75 Amps
Power Bandwidth @ Half-Rated output, 8<10 Hz - 150 kHz
Frequency response @ 1W (+0/-3dB) 5 Hz - 150 kHz
Damping factor (20Hz-20k Hz) >125
Signal-to-noise Ratio (Reference rated power output, A-WTD) Tuner/CD 95 dB
Phono (MM): 75 dB
Input sensitivity/Impedance Tuner/CD 270mV/43k Ohms
Phono (MM): 4.0mV/47k Ohms
Overload: Tuner/CD 6V
Phono (MM): 110 mV
Tone control range, Bass @ 50 Hz/Treble @ 10 kHz ±10 dB/±10 dB
Power supply: AC 230V, 50/60 Hz
Power consumption: 345 W
Dimensions (Width X Height X Depth): 439 X 110 X 395 mm
Weight: 10.35 kg
Thanks.
Comment