Hi everyone, first post. I am wondering if it's worth biamping the HTM2d. I will be getting 802d and want to biamp them with Bryston 6b(3 channel) 300w/channel amps but wondering if it's worth biamping the HTM2D. If I do biamp the HTM2D I will get another 6b or should I just get a 4b(2 channel) also 300w/channel and biamp the 802d only.
-
Last week i got another RB-1080 (stock is almost gone so i wanted to have another one which i'll use maybe for rears, maybe for center, maybe for next room, maybe to try biamping, so i thinked that definitly is not a waste).
I tried to biamp my speakers using Van Den Hull Cables CS-122.... -
Hi guys, ages ago I said I was keen to get a DEQX(digital equaliser and xover) for my Dynaudio Special 25's. Well now I've done that and biamped them using (at the moment) my Rotel Michi 200Wper channel power amp to the bass drivers and 2 of the 3 channels on my ROtel 993 power amp for the tweeters.... -
Hi, new 1056 owner here. Got a question for you all. My 86db speakers are not real easy to drive, although so far in my room, they sound very good with the 1056. I was thinking of buying a couple of subwoofer amps specifically made to drive the subwoofer section of my NHT 2.5's, namely the NHT SA-2... -
I have never used an amp and pre before but just by the name (preamp), I Imagine when setting up you connect the Preamp to the amp, then the amp to the speakers. Is this correct? If so, then one of the jobs of the amp is to make sure the signal sent doesn't get jumbled and mixed in its circuits. It... -
Has anyone tried doing A/B comparisons on the 802D's with biamping vs. not biamping?
I was wondering how much better it would sound with two Classe 3200 power amps (200 watts per channel) biamped on my 802D's/HTM2D as opposed to just using one 3200 amp for the three speakers.
...