Dynaudio 5.1 AIR system?

Collapse
This topic is closed.
X
X
 
  • Time
  • Show
Clear All
new posts
  • Bruce
    Senior Member
    • Aug 2000
    • 156

    #1

    Dynaudio 5.1 AIR system?

    Anyone heard these active powered monitors in a 5.1 system?
    Any comments?

    I'm especially interested in how well the PC software via IP network (over Ethernet?) control works for various xover and Parametric EQ parameters.


    Dyn AIR system


    Then point to "Products" and select "Enter the AIR World"




    Bruce
    ____________________________________________
    Bruce
  • Andrew Pratt
    Ultra Senior Member
    • Aug 2000
    • 16478

    #2
    how much does this system cost? This seems like a logical step forward IMO....providing its intuitve to use.




    Comment

    • Bruce
      Senior Member
      • Aug 2000
      • 156

      #3
      Here are some prices, but I haven't completely figured out the master /slave relationship yet.

      Dyn AIR pricing

      and Also another description




      Bruce
      ____________________________________________
      Bruce

      Comment

      Related Topics

      Collapse

      • jbreezy5
        Speaker Battle: KEF XQ5 vs. Dynaudio Audience 82
        by jbreezy5
        This is a review/comparison of the KEF XQ5's with Dynaudio Audience 82's:

        I purchased a pair of KEF XQ5's used yesterday for $1,000 from Theatrical Concepts Inc. on Craig's List. They seem to be fully broken in; they lack the typical signs to indicate otherwise. Initially I was not sure...
        18 April 2010, 00:01 Sunday
      • Bruce
        Purple, Heard the Blue Sky "System One"?
        by Bruce
        Have you heard this setup in a 5.1 config with the BMC unit in a room?

        If so, what are your impressions?

        Bright, detailed, harsh, what?

        These are powered monitors.

        I'm trying to compare it to the Dynaudio "AIR System" powered monitoring...
        28 December 2004, 12:42 Tuesday
      • miner
        secondary system - analogue
        by miner
        Well, I finally have set up my analogue secondary system. I am using my first amp/pre - a Rotel RC-1070 and RB-1070. My source is a Rega P7 with Dynavector 20XH. The speakers are Dynaudio Audience 52SE and Sub 20A. Have yet to critically listen to it. The cabinet I will be using is an Ethan Allen...
        02 August 2008, 12:04 Saturday
      • Belgarath99
        RB991/RB1080 for Dyn Audience 82
        by Belgarath99
        Hi

        I have heard that this is the best forum to talk Rotel.

        I am thinking of buying an used Rotel RB991 to add to my HT setup. I will use the pre-out of my Denon AVR 3805 to connect to the power amp to drive my Dynaudio Audience 82 speakers.

        I have heard comments...
        11 June 2005, 05:35 Saturday
      • b_force
        Active controlled BR-system
        by b_force
        Introduction
        Sometimes you want to use your favourite driver or have to use a specific driver in a design, but unfortunately the BR pipe is way to long.
        You can use a smaller pipe diameter, however that limits the max SPL (because of the air velocity) and would be a sin for a driver with...
        16 June 2010, 11:07 Wednesday
      • Loading...
      • No more items.
      Working...
        Searching...Please wait.
        An unexpected error was returned: 'Your submission could not be processed because you have logged in since the previous page was loaded.

        Please push the back button and reload the previous window.'
        An unexpected error was returned: 'Your submission could not be processed because the token has expired.

        Please push the back button and reload the previous window.'
        An internal error has occurred and the module cannot be displayed.
        There are no results that meet this criteria.
        Search Result for "|||"