Hi folks,
we're changing our hifi and we are pondering which ampli to buy,
i write here - hope no harm in it - even if our stereo system
is only occasionaly used for movies, it is essentialy for
listening music, not really an Home Theater.
BUT since the room is about 9 x 5 meters and
the listening positions are all over the room, we have 4 loudspeakers
one in each corner plus one active subwoofer.
So my question is, shall we look for a multichannel ampli
(something like 4+1) or it is ok to have a 2channel amplifier
that allows two pairs of loudspeakers?
The 4 loudspeakers are from the German Nubert nubox511
(Maximum power: 300 watts
Impedance: 4 ohms
Frequency response: 55-22000 Hz + / - 3 dB, with ATM 32-22000 Hz
Sensitivity: 86 dB)
and the active subwoofer is the Nubert nuboxAW991 (max power 210W Frequency response: 20-110 Hz ± 3 dB with adjustable upper cutoff frequency 50-125 Hz, 19-125 Hz-6dB)
:frypan: :dothewave: arty:
thank you very much!
Two amplifier that look interesting for us are the
multichannel Rotel RMB-1565 (Power Output 200 watts x 5/ch 20-20 kHz, 0.03% THD, 4 ohms)
and the 2channel
another ROTEL RB-1552 (2 x 120 watts 20Hz-20kHz, <0.03%, 8 Ohms)
ciao
all comments are very much welcome !!!
eiasu
we're changing our hifi and we are pondering which ampli to buy,
i write here - hope no harm in it - even if our stereo system
is only occasionaly used for movies, it is essentialy for
listening music, not really an Home Theater.
BUT since the room is about 9 x 5 meters and
the listening positions are all over the room, we have 4 loudspeakers
one in each corner plus one active subwoofer.
So my question is, shall we look for a multichannel ampli
(something like 4+1) or it is ok to have a 2channel amplifier
that allows two pairs of loudspeakers?
The 4 loudspeakers are from the German Nubert nubox511
(Maximum power: 300 watts
Impedance: 4 ohms
Frequency response: 55-22000 Hz + / - 3 dB, with ATM 32-22000 Hz
Sensitivity: 86 dB)
and the active subwoofer is the Nubert nuboxAW991 (max power 210W Frequency response: 20-110 Hz ± 3 dB with adjustable upper cutoff frequency 50-125 Hz, 19-125 Hz-6dB)
:frypan: :dothewave: arty:
thank you very much!
Two amplifier that look interesting for us are the
multichannel Rotel RMB-1565 (Power Output 200 watts x 5/ch 20-20 kHz, 0.03% THD, 4 ohms)
and the 2channel
another ROTEL RB-1552 (2 x 120 watts 20Hz-20kHz, <0.03%, 8 Ohms)
ciao
all comments are very much welcome !!!
eiasu
Comment