Phase Tech "DARTS Series"

Collapse
This topic is closed.
X
X
 
  • Time
  • Show
Clear All
new posts
  • aud19
    Twin Moderator Emeritus
    • Aug 2003
    • 16706

    #1

    Phase Tech "DARTS Series"

    Anybody catch the review in HT Magazine or better yet, get a chance to see/hear these in person yet? The system seems pretty darned cool and effective (if not overly cheap)



    dARTS - Uniform Sound for Every Seat™
    Only Phase Technology offers its proprietary Digital Audio Reference Theater System - known as dARTS - a breakthrough in consumer audio that combines bi- and tri-amplified loudspeakers, high-powered digital signal processing, and revolutionary room correction software into one amazing sound system. dARTS delivers the same precise and calibrated high-quality audio performance to every seat in your home theater system, with each speaker guaranteed to +/- dB of the reference target curve.

    Room Sonic Signature and dARTS
    Traditionally, because each room has its own sonic signature there is a problem with multiple arrivals of both low and high frequencies to each seat.
    With dARTS, your home theater system will be professionally calibrated so all sounds from all speakers arrive at each listener's ears simultaneously, yielding precise reproduction.

    Pick Any Seat in the House
    By utilizing Audyssey's MultEQ XT software, dARTS offers the first affordable technology available to consumers that corrects room acoustics problems for multiple listeners. It uses mathematical "clustering" to measure a room - another first in the consumer electronics industry - then automatically adjusts the amp and speakers to deliver accurate sound. The software is designed for ease of use, and dARTS setup is a simple procedure for a certified installer.
    The result: dARTS delivers the same precise, calibrated high-quality sound to every seat in the house, regardless of the room's sonic signature. Dependable, repeatable sonic perfection!
    Jason
  • Chris D
    Ultra Senior Member
    • Dec 2000
    • 16875

    #2
    Huh... well, they look cool. Pretty low WAF, though.
    CHRIS

    Well, we're safe for now. Thank goodness we're in a bowling alley.
    - Pleasantville

    Comment

    • aud19
      Twin Moderator Emeritus
      • Aug 2003
      • 16706

      #3
      Originally posted by Chris D
      Huh... well, they look cool. Pretty low WAF, though.
      Well they're in and on wall models primarily so actually if installed properly, they do :B The really cool part about them is how they sound the same no matter what room they're in....cool outside the box thinking there :T
      Last edited by Chris D; 13 November 2016, 16:00 Sunday.
      Jason

      Comment

      • Azeke
        Super Senior Member
        • Mar 2003
        • 2123

        #4
        Hmmmm, sort of like the Omni-polar technology by Mirage which I certainly enjoy :T . However, I haven't actually heard them yet.

        Is it true that these speakers come with a 10 year warranty h: ?

        Peace and blessings,

        Azeke

        Comment

        • maseline_98
          Senior Member
          • Apr 2005
          • 317

          #5
          I'm kind of curious what the price point of these might be?


          edit: nevermind....seems to be around 15k

          Sony kds-60a2000\Panasonic BD-55k\XBOX 360 Premium(20gig)Slingbox\Xbox(flashed) running XBMC
          Emotiva UMC-1\Emotiva XPA-5\Klipsch (2)RF-7s with DeanG xover upgrade, RC-7 with DeanG xover upgrade, (2)RS-7s\SVS 20-39PC+

          _____________________________
          “Insanity: doing the same thing over and over again and expecting different results.” - Einstein

          Comment

          • Snap
            Super Senior Member
            • Feb 2005
            • 1295

            #6
            Originally posted by Azeke
            Hmmmm, sort of like the Omni-polar technology by Mirage which I certainly enjoy :T . However, I haven't actually heard them yet.

            Is it true that these speakers come with a 10 year warranty h: ?

            Peace and blessings,

            Azeke
            Yep Phase Tech has 10 year warranty.

            The Darts sound awesome. Phase Tech makes a great speaker. I had the V-12 system in my house. They just have a LOW WAF factor.
            The Bitterness of poor quality last longer than the joy of low prices.

            Comment

            • John Holmes
              Super Senior Member
              • Aug 2000
              • 2707

              #7
              I listen to a D.A.R.T.S. system at my dealer a few months ago. It was a very smooth and detailed sound. Of course it was in a very well designed room but, I enjoyed what I heard. But the mains in the setup I listened to were floorstanders.
              "I have come here, to chew bubblegum and kickass. And I'm all out of bubblegum!!!"

              Comment

              • georgev
                Senior Member
                • Jul 2004
                • 365

                #8
                Can you put them "In-Cabinet" as opposed to in wall or on wall, and not interfere with the sound?
                John, why the "but the mains were floorstanders" with the way it is designed would it matter a great deal?
                The reason I ask these questions is that they are my shortlist for my new theatre, but I have no way of auditioning them in South Africa, as we do not have a Phase Tech dealer here.
                Regards,
                george.

                Comment

                • John Holmes
                  Super Senior Member
                  • Aug 2000
                  • 2707

                  #9
                  Hello George,

                  No sir, it doesn't matter at all. I was just stating that because the system posted in the above picture has mains which require a stand/shelf/wall mounting. Heck, the ones that I saw may have been the exact same speakers posted above on painted black stands! :B I'm old and the vision is first to go. :rofl: But if they were, those stands were a perfect fit to the contour of the speakers. I didn't pay a ton of attention to them since I was really there to audition the B&K Reference 50 (the processor they setup with the D.A.R.T.S.) which I purchased.

                  I do recall really enjoying the smooth sound from the PhaseTech system though.
                  "I have come here, to chew bubblegum and kickass. And I'm all out of bubblegum!!!"

                  Comment

                  Related Topics

                  Collapse

                  • Snap
                    New Phase Tech Plasma Speakers
                    by Snap
                    Hey just wanted to share Phase Tech has New Plasma Speakers! :T They are a half moon design. One for each side. They have 2 5.25 inch drivers and a 1 inch soft dome tweeter! They look cool. And for the thin wall mount speakers to mount next to a plasma they will look cool! If they keep with Phase Tech's...
                    28 May 2005, 21:30 Saturday
                  • Briz vegas
                    Integrating a phase reversing pre into a HT system
                    by Briz vegas
                    Hi guys

                    Rel subs have a high level connection via the left + & - and the right + only at the speaker connections on the power amp. They also allow you to have this high level connection and a low level connection hooked up at the same time.

                    How do I do a high level...
                    08 October 2006, 06:11 Sunday
                  • lord_darkhelmet
                    question on phase
                    by lord_darkhelmet
                    I've looked around and can't find an answer that I understand. Hopefully some kind soul can break it down for me.

                    I took some measurements of well known manufactured speakers and compared them to some I designed. The measurements were done at the same time under same conditions. They...
                    20 May 2008, 10:05 Tuesday
                  • ThomasW
                    Equi=Tech 'Q' tranny based DIY balanced power project
                    by ThomasW
                    Glen's DIY project piqued my curiosity about the 'blem' transformers-in-a-box offered by Equi=Tech. So I ordered a few.... :wink:

                    My oh my, these are indeed the holy grail of transformers ... 8O 8O 8O 8O 8O 8O

                    Image not available

                    This is the 1.5kVA unit. Now it...
                    30 December 2004, 16:48 Thursday
                  • augerpro
                    Measured phase in SE
                    by augerpro
                    I have quick question for the 50 lb. brains here. When doing SPL measurements in SE I reference the baffle as 0 cm distance. So when performing FFT all excess phase is removed and what's left is the phase difference due to AC offset. This way it's included in the measured phase and crossover CAD has...
                    27 January 2007, 23:20 Saturday
                  • Loading...
                  • No more items.
                  Working...
                    Searching...Please wait.
                    An unexpected error was returned: 'Your submission could not be processed because you have logged in since the previous page was loaded.

                    Please push the back button and reload the previous window.'
                    An unexpected error was returned: 'Your submission could not be processed because the token has expired.

                    Please push the back button and reload the previous window.'
                    An internal error has occurred and the module cannot be displayed.
                    There are no results that meet this criteria.
                    Search Result for "|||"