XLR or 1/4"?

Collapse
This topic is closed.
X
X
 
  • Time
  • Show
Clear All
new posts
  • -Haro-
    Junior Member
    • Jan 2006
    • 29

    XLR or 1/4"?

    I can't seem to find a cut and dry answer to this so I'll post it here and see if anyone can help me.

    I just purchased a Behringer EP-2500 for a DIY sub I'm building and I need to connect the amp to my Yammy RXV-1500.

    Do I use RCA to 1/4" or RCA to XLR? And if XLR, Male or Female. Any help would be appreciated. Thanks.
  • taz13
    Senior Member
    • Jun 2004
    • 930

    #2
    Use 1/4", I use both and with a sub there is no difference and the 1/4" is less cost. What I do is use 1/4" to rca adapter at the europower and regular rca from receiver to amp. Remember that pro sound amps use a higher i/p level then a consumer unit, so you will probably have to increase your sub out to a higher level. I use a Behringer Feedback destroyer in my cct for both eq and level matching.
    The day is not complete if something new is not learnt.
    Taz/Rick/Richard/Ricardo

    Comment

    • -Haro-
      Junior Member
      • Jan 2006
      • 29

      #3
      Gotcha.

      Thanks for your help Taz.

      Comment

      Working...
      😀
      😂
      🥰
      😘
      🤢
      😎
      😞
      😡
      👍
      👎
      Searching...Please wait.
      An unexpected error was returned: 'Your submission could not be processed because you have logged in since the previous page was loaded.

      Please push the back button and reload the previous window.'
      An unexpected error was returned: 'Your submission could not be processed because the token has expired.

      Please push the back button and reload the previous window.'
      An internal error has occurred and the module cannot be displayed.
      There are no results that meet this criteria.
      Search Result for "|||"