They look very well made at an attractive price. I was just curious if any one is using them & if you could share your thoughts. I am looking at their Ultimate speaker cable. One run 2m, the other run 3m. Locking bananas at the amp & bare wire tinned for the speaker. They don't have a big enough spade (5/8 needed) for the speaker connection, hence the tinned bare wire. I am using a pair of jumpers that are using bananas already.
-
-
First off, just a friendly reminder about the forum's cable post guideline's
Second, if you're looking for good quality, affordable cables, I HIGHLY recommend forum sponsor CAT Cables (link's at the bottom of the page). You get well built, good sounding cables for a good price and you get to help support the forum at the same time! :T
One other thing....I hate to be nitpicky but also as per forum rules can you please remove your equipment list from your sig as it clutters threads and also screws with the forum's search engine? I see you've already got it listed in the appropriate profile space as well anyway :TJason -
Looks like somebodies feathers got ruffled. :W I thought it was a rather straight forward question & was not intended to start a commotion. Can one only ask a question in regards to Catcables? If so, then I apologize.Comment
-
No ruffled feathers Just friendly reminders about the forum rules and this customers recomendation of CAT for excellent quality and affordable cables. As a bonus you also get to help support the forum that you've utilized, gained knowledge from and hopefully made some aquaintances on :T
Seems like a no-brainer to me
JasonComment
-
What is the best ?
My Dealer suggested LMlabs Cobalt in stead of B&W600 series, is he right ?
advise is welcome.
MegaRotel -
Curious how many of you use bare speaker wire connections and how you deal with wire corrosion. I just replaced my speaker wires using 10 gage 8 foot runs with bare connections to both my amp and speakers and it sounds really good. How often do you think I need to cut back the wire to deal with corrosion?... -
I just completed my Cobalt S set of loudspeakers with a JM LAB Cobalt SW 27A subwoofer (secondhand) and had the help of an experienced friend to calibrate it.
I have an RSX 1056 and when he saw the OSD menu, he told me that I was using an old firmware and that updating it will help to... -
I just ordered some terminated speaker wire today. I upped the gauge to go thicker than I'm currently running and thought "what the hey, banana connectors would be a nice touch." My instruction manual for the 601's says this:
"The terminals accept 6mm (1/4-in) spades, bared... -
Hi,
This is my first post on the Rotel forum. Great forum btw!
I am considering a RMB-1095 or a combination of a RB-1080 for my front JMLab Cobalt 820 speakers, a RB-1070 for my Cobalt 806 surrounds and a RB-1070 for my Cobalt CC800 center speaker, with one channel left...
Comment