VituixCAD v2

Collapse
X
Collapse
 
  • Page of 30
  • Time
  • Show
Clear All
new posts
Previous 1 20 30 template Next
  • kimmosto
    Senior Member
    • Dec 2006
    • 713
    #1306
    3.0.1.4 (2026-06-07)

    Main
    • Audibility warning and Audibility alarm lines added to GD & Phase graph.
    Impulse
    • Step and RMS curve smoothing reduced.
    • Single IR file export filename changed.
    VituixCAD, Features, User manual, Measurements with CLIO, ARTA, REW, SoundEasy, Download
      👍 1
      • Bottom

      Comment

      • technodanvan
        Super Senior Member
        • Nov 2009
        • 1548
        #1307
        Just a note kimmo, the 'download' link in your signature points to VituixCAD2.
        - Danny
          👍 1
          • Bottom

          Comment

          • kimmosto
            Senior Member
            • Dec 2006
            • 713
            #1308
            3.0.1.5 (2026-07-28)

            Main
            • GD audibility warning and alarm traces in GD & Phase graph modified. See user manual for more information.
            • Normalization of group delay traces to cycles removed because in practice audibility threshold is quite constant in milliseconds (not in cycles).
            • Value of the selected (bold) curve at the mouse cursor is displayed as interpolated if there are only a few data points.
            VituixCAD, Features, User manual, Measurements with CLIO, ARTA, REW, SoundEasy, Download
              👍 1
              • Bottom

              Comment

              • draki
                Member
                • Oct 2012
                • 40
                #1309
                I was reading this white paper on the SEAS Storeglimt project.

                What caught my attention was the Z-offset value attributed to the drivers on the V-CAD crossover schematics.

                Looking at the enclosure, it has a straight front, all the drivers are on the same Z-plane.
                Knowing what I know about V-CAD so far, their Z offsets should all be zero..?

                What am I missing here? I presume the SEAS team knows more that I do....

                SEAS Storeglimt
                https://www.seas.no
                THE ART OF SOUND PERFECTION BY SEAS
                  • Bottom

                  Comment

                  Previous 1 20 30 template Next

                  Related Topics

                  Collapse
                  • Reet
                    How To: Mirror EQ with VituixCAD
                    by Reet
                    With VituixCAD, we have the ability to provide a mirror EQ function, that can then be passed to APO EQ for active processing. This allows for a speaker's frequency response to be fully compensated for without requiring many bands of parametric EQ.

                    ​VituixCAD Process
                    Connect each driver and EQ blocks in the crossover section as shown. Ensure that the active peak/notch filters are “shorted” so that only the G(f) block is directly connected to the driver. Three PEQ blocks are show,...
                    26 December 2022, 12:26 Monday
                  • Reet
                    How To: VituixCAD Extended Impedance Model For Any Driver
                    by Reet
                    Loudspeaker T/S often includes only a single Le value for inductance, however driver motors are usually much more complex than a single coil of wire, so Le on its own is not a very good description of the driver characteristics. An extended impedance model, or “semi-inductance” model can provide additional characterization of the impedance curve for greater accuracy.

                    Many Scan-Speak drivers include this data in the “advanced parameters” section of their datasheets, however the...
                    26 December 2022, 14:07 Monday
                  • Reet
                    How To: Export Impulse Response from REW for use in VituixCAD (prior to 2.0.98.6)
                    by Reet
                    Update: Since VituixCAD 2.0.98.6, exporting IR using windowing as described here is no longer required. the impulse response can be exported directly, make sure to uncheck "normalize" on export. VituixCAD will automatically set "skip samples" to 1m (2.907ms) prior to the start time of the exported impulse response to maintain correct timing on import.

                    REW can export the measured impulse response directly as MLSSA formatted text file, which can be used within the...
                    25 December 2022, 16:28 Sunday
                  • Reet
                    How To: Filter Simulation with VituixCAD and EQ APO
                    by Reet
                    With meticulous passive filter design, it may be beneficial to hear the result before spending money on crossover parts and putting in the time to assemble the crossover. Fortunately, with VituixCAD and EQ APO and filter can be simulated digitally. This process can simulate multiple drivers simultaneously, one driver for each output on a soundcard, for example a 7.1 soundcard could simulate a stereo 3 way system utilizing 6 channels.

                    Note that an emulated passive filter will reproduce...
                    26 December 2022, 11:55 Monday
                  • Reet
                    Simplified polar data generating in VituixCAD
                    by Reet
                    I wrote this document this morning, detailing a simplified process for generating off-axis data in VituixCAD. This process allows for use of measured on-axis data to generate simulated off-axis data with a good degree of accuracy. This process may be useful for "quick simulation" without the...
                    07 August 2021, 13:58 Saturday
                  • Loading...
                  • No more items.
                  Working...
                    Searching...Please wait.
                    An unexpected error was returned: 'Your submission could not be processed because you have logged in since the previous page was loaded.

                    Please push the back button and reload the previous window.'
                    An unexpected error was returned: 'Your submission could not be processed because the token has expired.

                    Please push the back button and reload the previous window.'
                    An internal error has occurred and the module cannot be displayed.
                    There are no results that meet this criteria.
                    Search Result for "|||"