'Singularity' Build Log

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • technodanvan
    Super Senior Member
    • Nov 2009
    • 1483

    #91
    I do not believe so, though perhaps I'll crack them open this weekend to check. I suspect that since the Singularities are placed slightly in front of the Ardents we may be getting a few negative interactions. I need to move them anyway, so maybe I'll do that today and see how that changes things.

    Edit:

    Alright, I moved them and took some new sweeps. Output was a little lower this time as I believe the Singularities were complaining about the low end at the previous level. I also played with the mic a bit and found moving it back a couple inches removed the 'suck out' around 3kHz.

    Ardents:

    Click image for larger version

Name:	ardents.jpg
Views:	1
Size:	66.1 KB
ID:	866662

    Singularities:

    Click image for larger version

Name:	singularities.jpg
Views:	1
Size:	67.6 KB
ID:	866663
    Last edited by technodanvan; 17 February 2022, 17:18 Thursday.
    - Danny

    Comment

    Related Topics

    Collapse

    • JonW
      The Schlafmutzes Mini MT’s design and progress
      by JonW
      Here are the Schlafmutze Mini MT’s!

      This speaker design is still in progress. As things get closer to the end I will update this thread and put all the relevant, permanent details into these first few posts. For now here is the start of the project and where the progress is at, currently....
      28 February 2013, 21:55 Thursday
    • meb46
      New Project for Critique...
      by meb46
      Well, after weeks of modelling and some MOST helpful Forum supporters, I am in the final stages I deciding if I should proceed with my latest project. I thought I would open it up for "all and sundry" to add their comments before I make the final go-no-go decision

      As noted...
      10 January 2012, 00:57 Tuesday
    • ColoradoTom
      "Piscis" 3-Way Project
      by ColoradoTom
      I figured I'd start a new thread because some of the others are starting to get a little "long in the tooth"

      Since the mid and high drivers are in flux I'm starting on the bass units and then will add the "head" unit in the future.

      I've modeled a vented...
      10 July 2007, 20:15 Tuesday
    • technodanvan
      Build Log: Scrap Pile "Zingers" by Wolf
      by technodanvan
      Jon's 'Obi-Wan' project got me thinking about a few kits I have lying around, including one that is somewhat similar in that it is an 8" two-way. I'm talking of course, of Ben's (Wolf's) Zingers design. I purchased this at least a year or two ago from Meniscus since it was relatively low cost and...
      21 February 2022, 13:51 Monday
    • wmilas
      Looking for a first DIY project.
      by wmilas
      Hi all, I'm a new poster I've looked at all the completed threads here and at Zaph's site.

      I recently purchased a table saw for other projects and thought I might as well try my hand at a DIY speaker project. I (obviously) would like to start small. After thinking about what I could...
      21 December 2006, 10:53 Thursday
    • Loading...
    • No more items.
    Working...
      Searching...Please wait.
      An unexpected error was returned: 'Your submission could not be processed because you have logged in since the previous page was loaded.

      Please push the back button and reload the previous window.'
      An unexpected error was returned: 'Your submission could not be processed because the token has expired.

      Please push the back button and reload the previous window.'
      An internal error has occurred and the module cannot be displayed.
      There are no results that meet this criteria.
      Search Result for "|||"